Flooring Calculator
HoneyDoMath.eu
Enter the room's length and width, the coverage printed on the pack and a waste allowance to get the packs of flooring to buy and what is left over, rounded up once. Work in metres and square metres.
Estimates for planning, not professional advice. Read the full notice.
The drawing did not open. Length and width are still here.
Room: shape and size
Skip the drawingDrag a round corner to move it. The small hollow diamond on a side is its curve handle: drag it across the side to curve the side (it is not a corner). To add a corner (a new point), tap the side itself, then choose Add a point here. Tapping a corner or a side opens its actions. Drag empty space to move the view; pinch, or Ctrl and the mouse wheel, to zoom. The keys are listed under Keys.
Keys
- Tab
- next corner; each says how far it is from corner 1
- Arrow keys on a corner
- move it one square; ten with Shift; 1 mm with Alt
- Delete or Backspace
- remove the corner; its two sides join in one straight side
- + on a corner
- add a corner halfway along the next side
- Arrow keys on the drawing
- move the view; further with Shift
- + and - on the drawing
- zoom in and out
- 0 on the drawing
- show the whole shape
- Ctrl+Z (Cmd+Z on a Mac)
- undo, except inside a typed field (it keeps its own)
- Ctrl+Shift+Z or Ctrl+Y
- redo
- Escape while dragging
- put it back where it was
- Enter on a corner or side
- go to its actions
- Escape in the actions
- close them and go back to the drawing
The drawing did not load. Check your connection and try again.
- Area
- 15.12 m² (162.75 ft²)
- Perimeter
- 15.6 m (51 ft 2 3/16 in)
- Cut-out edges
No area until the shape is fixed.
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Shape: Rectangle Change
Sides
Corners
Cut-outs
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Example: a bedroom floor
8 packs of flooring
- Floor area 15.12 m² (162.75 ft²)
- Area with the waste allowance, before rounding 16.63 m² (179.03 ft²)
- Flooring bought 17.6 m² (189.44 ft²)
- Bought beyond the floor's own area 2.48 m² (26.69 ft²)
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Flooring (packs) 8
Questions
How much extra flooring should I buy?
The waste allowance is your own figure, starting at a typical allowance for a straight layout. The calculator adds it once to the floor area and rounds up once to whole packs. A diagonal or herringbone layout takes more, so enter your own figure.
How many packs of flooring do I need for a four by four metre room?
The table of common room sizes shows the packs for several rooms at an example pack coverage. Pack coverage differs by product, so enter the coverage from your own label for your count.
Does the expansion gap change the number of packs?
No. The gap is shown as your own input and is not taken off the floor area, so the count follows the room's full area.
Worked example: a bedroom floor
Show the working
- Area: length times width 4.2 m (13 ft 9 3/8 in) × 3.6 m (11 ft 9 3/4 in) = 15.12 m² (162.75 ft²)
- Add the waste allowance, once 15.12 m² (162.75 ft²) × 1.1 = 16.63 m² (179.03 ft²)
- Divide by the coverage of one pack 16.63 m² (179.03 ft²) ÷ 2.2 m² (23.68 ft²) = 7.56 packs
- Round up once, to whole packs 7.56 packs = 8 packs of flooring
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Waste allowance | 10% | |
| Default A typical allowance for a straight layout, added once. It is your own figure: change it for your layout. | ||
| Coverage of one pack | No default | |
| Default From the pack label. Check your label or supplier. | ||
| Plank size | No default | |
| Default It does not change the count, which follows the pack coverage. Check your label or supplier. | ||
| Expansion gap | No default | |
| Default Shown for your own layout; it does not change the pack count. Check your label or supplier. | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Packs for common room sizes
Packs for common room sizes at an example pack coverage, with the waste allowance added once
| Room | Floor area | Packs at 2.2 m² a pack (example) |
|---|---|---|
| 3 × 3 m | 9 m² (96.88 ft²) | 5 |
| 3 × 4 m | 12 m² (129.17 ft²) | 6 |
| 4 × 4 m | 16 m² (172.22 ft²) | 8 |
| 4 × 5 m | 20 m² (215.28 ft²) | 10 |
| 5 × 6 m | 30 m² (322.92 ft²) | 15 |
| 6 × 8 m | 48 m² (516.67 ft²) | 24 |
The pack coverage is an example, not a product's. Your own label gives the real coverage, so enter it in the field above for your count.