Roof Area Calculator

Enter the footprint of the house and the roof pitch in degrees and get the roof area in square metres, with the length of each edge, for a gable, hip or mono-pitch roof, and roof covering by the unit, at a unit area you enter. The working is shown for an example.

Estimates for planning, not professional advice. Read the full notice.

Roof footprint

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 10 metres, 32 feet 9 and 11 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 8 metres, 26 feet 2 and 15 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Like 11 m²

reads as 2 square metres, 21.53 square feet

Example: a gable roof

92.38 m² (994.33 ft²)

  • Eaves length 20 m (65 ft 7 3/8 in)
  • Verge length 18.475 m (60 ft 7 3/8 in)
  • Ridge length 10 m (32 ft 9 11/16 in)

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Roof covering, per unit 51

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How do I work out the area of a pitched roof?

    Multiply the footprint by the pitch multiplier for the pitch in degrees. The example shows the footprint, the multiplier and the area.

    Does a hip roof have more area than a gable roof?

    Not for the same footprint and the same pitch on every plane: both are the footprint times the pitch multiplier. The hip roof has more edges to cut, so its waste allowance starts higher.

    Worked example: a gable roof

    Show the working
    1. Footprint: length times width 10 m (32 ft 9 11/16 in) × 8 m (26 ft 2 15/16 in) = 80 m² (861.11 ft²)
    2. Pitch multiplier for the pitch in degrees 30 degrees = 1.1547
    3. Roof area: footprint times the pitch multiplier 80 m² (861.11 ft²) × 1.1547 = 92.38 m² (994.33 ft²)
    4. Add the waste allowance, once 92.38 m² (994.33 ft²) + 10% waste = 101.61 m² (1,093.76 ft²)
    5. Units: divide by the area of one unit, then round up once 101.61 m² (1,093.76 ft²) ÷ 2 m² (21.53 ft²) = 51 units of roof covering

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance, simple roof 10%
    Default Your own allowance, added once to the total. Check your label or supplier.
    Waste allowance, hip roof 15%
    Default Your own allowance, added once to the total. Check your label or supplier.