Decking Calculator

Enter the length and width of the deck, the board width and the gap you will leave, and get the boards to order from the stock length and the screws, with waste on the total; the working shows the rows across the deck, the boards in each row and the joists crossed.

Estimates for planning, not professional advice. Read the full notice.

Deck and boards

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3.6 metres, 11 feet 9 and 3 quarters inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 4.8 metres, 15 feet 9 inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 140 millimetres, 5 and 1 half inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 5 millimetres, 3 sixteenths of an inch

Example: a deck

28 decking boards

  • Rows of boards across the deck 25
  • Boards before waste 25
  • Joists the boards cross 13
  • Screws, at the number you chose for each board and joist 650

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Decking boards, 28 mm, 4.8 m 28
  • Decking screws 650

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How many decking boards do I need?

    The calculator works out the rows across the deck from the board width and the gap, the boards in each row from the stock length, and adds your waste allowance, rounded up once. Change any size and the count changes.

    How big a gap goes between decking boards?

    The gap is the number you type; the calculator does not choose it. Use the figure in your board maker's fixing guide: the rows and the boards change with it.

    How many screws are there for each board?

    The tool counts the screws at every place a board crosses a joist, at the number you pick for each crossing. Check the fixing count against your product's guide.

    Worked example: a deck

    Show the working
    1. Rows: the deck width plus one gap, over a board plus a gap, rounded up 3.6 m (11 ft 9 3/4 in) + 5 mm (3/16 in) ÷ 145 mm (5 11/16 in) = 25 rows
    2. Boards in each row: the run over the stock length, rounded up 4.8 m (15 ft 9 in) ÷ 4.8 m (15 ft 9 in) = 1 board in each row
    3. Boards before waste: rows times boards in each row 25 rows × 1 board in each row = 25 decking boards
    4. Add the waste allowance and round up once 25 decking boards + 10% = 28 decking boards
    5. Screws: rows times joists crossed times screws at each crossing 25 rows × 13 joists × 2 screws = 650 screws

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance 10%
    Default Your own allowance, added once to the total. Check your label or supplier.

    This deck by stock length

    Boards per row, boards before waste, the stock left over and boards with offcuts shared, for the deck above at each stock length

    Boards per row, boards before waste, the stock left over and boards with offcuts shared, for the deck above at each stock length
    Stock lengthBoards in each rowBoards before wasteOffcut left overBoards if offcuts are shared
    2.4 m 2500 mm (0 in)50
    3.6 m 25060 m (196 ft 10 3/16 in)34
    4.8 m 1250 mm (0 in)25

    Every figure is the deck in the example, with each stock length in turn. The leftover column is the stock bought less the rows laid.