Wood Flooring Calculator

Enter the room, the coverage on your wood flooring pack and a waste allowance to get the packs to buy, rounded up once. The table counts the example room at four allowances of your own, so you can see how the count moves.

A ready-made setup of the Flooring Calculator.

Estimates for planning, not professional advice. Read the full notice.

Room and pack

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 4.8 metres, 15 feet 9 inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3.6 metres, 11 feet 9 and 3 quarters inches

Like 11 m²

reads as 1.8 square metres, 19.38 square feet

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Example: a wood floor in a bedroom

11 packs of wood flooring

  • Floor area 17.28 m² (186 ft²)
  • Area with the waste allowance, before rounding 19.01 m² (204.6 ft²)
  • Flooring bought 19.8 m² (213.13 ft²)
  • Bought beyond the floor's own area 2.52 m² (27.13 ft²)
  • Flooring (packs) 11

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How many packs of wood flooring do I need?

    Enter the room's length and width and the coverage printed on your pack. The calculator adds your waste allowance once to the floor area, divides by the pack coverage and rounds up once to whole packs.

    How much extra wood flooring should I buy for a diagonal layout?

    No maker's figure is printed here. A diagonal or herringbone layout cuts more boards, so type your own allowance in the waste field; the table shows how the count moves from nought to fifteen per cent.

    Does the plank width change the count?

    No. The count follows the area and the pack coverage. The plank size fields are for your layout and are not counted.

    Worked example: a wood floor in a bedroom

    Show the working
    1. Area: length times width 4.8 m (15 ft 9 in) × 3.6 m (11 ft 9 3/4 in) = 17.28 m² (186 ft²)
    2. Add the waste allowance, once 17.28 m² (186 ft²) × 1.1 = 19.01 m² (204.6 ft²)
    3. Divide by the coverage of one pack 19.01 m² (204.6 ft²) ÷ 1.8 m² (19.38 ft²) = 10.56 packs
    4. Round up once, to whole packs 10.56 packs = 11 packs of wood flooring

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance 10%
    Default A typical allowance for a straight layout, added once. It is your own figure: change it for your layout.
    Coverage of one pack No default
    Default From the pack label. Check your label or supplier.
    Plank size No default
    Default It does not change the count, which follows the pack coverage. Check your label or supplier.
    Expansion gap No default
    Default Shown for your own layout; it does not change the pack count. Check your label or supplier.

    Packs by waste allowance

    Packs of wood flooring for the example room at four waste allowances, each worked on its own

    Packs of wood flooring for the example room at four waste allowances, each worked on its own
    Waste allowanceFlooring with wastePacks
    0% 17.28 m² (186 ft²)10
    5% 18.14 m² (195.3 ft²)11
    10% 19.01 m² (204.6 ft²)11
    15% 19.87 m² (213.9 ft²)12

    No maker's figure is printed here, so these are your own allowances. Each row adds its allowance once, then rounds up to whole packs.