Skirting Board Calculator
HoneyDoMath.eu
Enter a room's length and width, its doors and the length of your pieces to get the metres of skirting board and the lengths to buy, counted along the run and wall by wall, rounded up once.
Estimates for planning, not professional advice. Read the full notice.
Example: a bedroom
8 lengths of skirting board
- Run around the room 15.6 m (51 ft 2 3/16 in)
- Door width taken off 800 mm (2 ft 7 1/2 in)
- Run to cover 14.8 m (48 ft 6 11/16 in)
- Pieces by the linear count 7 pieces
- Pieces wall by wall 8 pieces
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Skirting board, by the length, lengths of skirting board 8
Questions
How many lengths of skirting board do I need?
The calculator takes the doors off the walls, adds your waste allowance once and divides by the piece length. It also counts each wall on its own, because a leftover piece cannot turn a corner, and it uses the larger of the two counts.
Does this work for a whole house or a single room?
It counts one room at a time. Add each room as its own item and the shopping list adds the lengths.
Worked example: a bedroom
Show the working
- Run around the room: all four walls 4.2 m (13 ft 9 3/8 in) × 2 + 3.6 m (11 ft 9 3/4 in) × 2 = 15.6 m (51 ft 2 3/16 in)
- Take the door off 15.6 m (51 ft 2 3/16 in) − 800 mm (2 ft 7 1/2 in) = 14.8 m (48 ft 6 11/16 in)
- Add the waste allowance, once 14.8 m (48 ft 6 11/16 in) × 1.1 = 16.28 m (53 ft 4 15/16 in)
- Divide by the piece length, round up once; take the larger of this and the wall-by-wall count 16.28 m (53 ft 4 15/16 in) ÷ 2.4 m (7 ft 10 1/2 in) = 8 lengths of skirting board
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Waste allowance | 10% | |
| Default A typical allowance for a straight layout, added once. It is your own figure: change it for your layout. | ||
| Length of a piece | No default | |
| Default The lengths you can buy. Check your label or supplier. | ||
| Width of each door | No default | |
| Default From your own doors. Check your label or supplier. | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm