Cubic Metre Calculator

Enter a length, a width and a depth in metres or millimetres and get the volume in cubic metres, with the same amount in litres and every step of the working shown.

Estimates for planning, not professional advice. Read the full notice.

Sizes

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 5 metres, 16 feet 4 and 7 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 2 metres, 6 feet 6 and 3 quarters inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 75 millimetres, 2 and 15 sixteenths inches

Example: a garden bed

0.75 m³ (0.98 yd³) to order (0.75 m³ exact)

  • The same volume in litres 750 L
  • Cubic metres at the supplier's minimum order 0.75 m³ (26.49 ft³)
  • Loose material, 1 m³ (1.31 yd³) 0.75 m³ (0.98 yd³)

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How do I work out a volume in cubic metres?

    Multiply the length, the width and the depth, all in metres. A depth in millimetres is changed to metres first, so seventy-five millimetres counts as seventy-five thousandths of a metre.

    How do I convert square metres to cubic metres?

    Square metres are an area, so they need a depth. Multiply the area by the depth in metres to get cubic metres. The calculator does the depth conversion for you and shows each step.

    How many litres are in a cubic metre?

    The working above multiplies the cubic metres by the thousand litres in a cubic metre and shows the result as the litres line.

    Worked example: a garden bed

    Show the working
    1. Area 5 m (16 ft 4 7/8 in) × 2 m (6 ft 6 3/4 in) = 10 m² (107.64 ft²)
    2. Volume at the depth 10 m² (107.64 ft²) × 75 mm (2 15/16 in) (0.07 m) = 0.75 m³ (26.486 ft³)
    3. Litres: multiply by the litres in a cubic metre 0.75 m³ (26.486 ft³) × 1,000 L in a m³ = 750 L
    4. Round up once, to the supplier's minimum order 0.75 m³ (26.49 ft³) = 0.75 m³ (26.49 ft³)

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance 0%
    Default No allowance unless you enter one. Check your label or supplier.
    Supplier's minimum order, in cubic metres 0.25 m³ (8.83 ft³, converted)
    Default Suppliers sell loose material in set amounts. This amount is an example value: check your supplier.

    By shape

    Volume in cubic metres and litres for common shapes

    Volume in cubic metres and litres for common shapes
    Shape and sizeVolumeLitres
    Triangle 3 m base, 2 m high × 75 mm 0.23 m³ (7.95 ft³)225 L
    Small square 600 mm × 600 mm × 50 mm 18 L18 L
    Curved edge, 3 m × 1.2 m with an arc of 2.4 m radius × 75 mm 0.35 m³ (12.39 ft³)350.89 L
    Round, 2.4 m across × 50 mm 0.23 m³ (7.99 ft³)226.19 L
    Box 4 m × 2 m × 600 mm 4.8 m³ (169.51 ft³)4,800 L

    Each shape's area comes from the same shape tools the calculator uses, and the area is multiplied by the depth.