Cladding Calculator

Enter the length, width and wall height of the house, its gable ends with their pitch, and every door and window, and get cladding boards or panels, opening trim, corner profiles and a starter profile, with waste added once and each product rounded up once. The working is shown for an example.

Estimates for planning, not professional advice. Read the full notice.

House and cladding sizes

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 12 metres, 39 feet 4 and 7 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 8 metres, 26 feet 2 and 15 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 2.5 metres, 8 feet 2 and 7 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 900 millimetres, 2 feet 11 and 7 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 2.1 metres, 6 feet 10 and 11 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 1.2 metres, 3 feet 11 and 1 quarter inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 1.2 metres, 3 feet 11 and 1 quarter inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 4 metres, 13 feet 1 and 1 half inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 2.2 metres, 7 feet 2 and 5 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3.6 metres, 11 feet 9 and 3 quarters inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 160 millimetres, 6 and 5 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3 metres, 9 feet 10 and 1 eighth inches

Example: a house in timber cladding

177 cladding boards

  • Net wall area 92.35 m² (994.05 ft²)
  • Opening trim pieces 9 opening trim pieces
  • Corner profiles 4 corner profiles
  • Starter profile pieces 14 starter profiles

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Cladding pieces, Cladding boards 177
  • Opening trim pieces 9
  • Corner profiles 4
  • Starter profile pieces 14

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How much cladding does a house need?

    Take the net wall area, add the waste allowance once, and divide by the area one piece covers. The calculator never rounds the area before dividing; it rounds the piece count up once at the end.

    How do I deduct windows and doors?

    Enter each opening at its own size. The calculator takes the area of every door, window and large door off the gross wall once, and asks again if an opening is taller than the wall or wider than the longest wall.

    Does a panel need a different count from a board?

    Only the area one piece covers changes. A panel can show more than one course, so its coverage is its length times the courses times the cover width. Check the piece length and cover width on your own label or with your supplier.

    Worked example: a house in timber cladding

    Show the working
    1. Gross wall: the distance round the house times the wall height 40 m (131 ft 2 13/16 in) × 2.5 m (8 ft 2 7/16 in) = 100 m² (1,076.39 ft²)
    2. Openings: every door and window at its own size 7.65 m² (82.34 ft²) = 7.65 m² (82.34 ft²)
    3. Net wall: gross wall less the openings 100 m² (1,076.39 ft²) − 7.65 m² (82.34 ft²) = 92.35 m² (994.05 ft²)
    4. Add the waste allowance, once, to the net wall 92.35 m² (994.05 ft²) + 10% waste = 101.59 m² (1,093.45 ft²)
    5. Divide by the area one piece covers: its length times the cover width 101.59 m² (1,093.45 ft²) ÷ 0.58 m² (6.2 ft²) = 176.36 pieces
    6. Round up once, to whole pieces 176.36 pieces = 177 cladding boards

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance 10%
    Default Your own allowance, added once to the total. Check your label or supplier.
    Board length (use your own) 3,600 mm (11 ft 9 3/4 in, converted)[1]
    Cedral's fixing guide gives its Lap plank as 3600 mm long with a 160 mm cover width, at 1.74 planks per m².
    Cover width of one course (use your own) 160 mm (6 5/16 in, converted)[1]
    Cedral's fixing guide gives its Lap plank as 3600 mm long with a 160 mm cover width, at 1.74 planks per m².

    Sources (1)

    1. Cedral facades fixing guide, February 2026 (opens in new tab), Cedral, February 2026. Manufacturer data.
      “3600mm”
      “1.74* ... * Undulating planks 2.14 per m2, flat method 1.47 per m2 If the cover width of Cedral Lap is decreased to 150mm, 1.86 per m2 ... Approx. installed weight based on 30mm overlap, cover width of 160mm per plank”
      Per Cedral's published data, checked 14 Nov 2026. Figures and regulations change; verify with the source. Back to where this is used (Source 1)

    These are summaries of what the sources say, not professional advice. Rules and product data change. Check with your local building control office and the product label about your own project.