Roof Tiles Calculator
HoneyDoMath.eu
Enter the length and width of a gable roof, a pitch in degrees and a roof tile, and get the roof tiles, ridge tiles, verge tiles and rolls of underlay, each rounded up once, with the working shown.
Estimates for planning, not professional advice. Read the full notice.
Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.
Example: a gable roof
4,615 roof tiles
- Roof area 73.25 m² (788.42 ft²)
- Ridge length 10 m (32 ft 9 11/16 in)
- Verge length, both ends 14.649 m (48 ft 3/4 in)
- Net cover of one roll, laps taken off 44.87 m² (482.92 ft²)
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Roof tiles, Marley Plain concrete tile, 100 mm gauge 4,615
- Ridge tiles, 400 mm 25
- Verge tiles, 400 mm 37
- Underlay rolls, 1000 × 50000 mm 2
Questions
How many roof tiles do I need for my roof?
Find the roof area from the footprint and the pitch, multiply by the tiles per square metre for your tile and add the waste allowance once. The calculator shows each step and rounds up once to whole tiles.
Where does the tiles per square metre figure come from?
For the tiles listed, it is the figure the maker prints on its own page, shown with its source. If your tile is not listed, choose your own tile and enter its cover width and gauge from your supplier's sheet.
Why is the ridge and verge size my own entry?
Ridge and verge tiles differ between makers, so their cover length is an example you replace with the figure on your supplier's sheet. The count changes with it, and each size is its own line on the list.
Worked example: a gable roof
Show the working
- Footprint: length times width 10 m (32 ft 9 11/16 in) × 6 m (19 ft 8 1/4 in) = 60 m² (645.83 ft²)
- Pitch factor for the angle (one over the cosine) 35 = 1.2208
- Roof area: footprint times the pitch factor 60 m² (645.83 ft²) × 1.2208 = 73.25 m² (788.42 ft²)
- Tiles: roof area times tiles per square metre, with the waste allowance added once, rounded up once 73.25 m² (788.42 ft²) × 60 per m²[1] × 1.05 = 4,615 roof tiles
- Ridge tiles: ridge length over the cover length of one tile, rounded up once 10 m (32 ft 9 11/16 in) ÷ 400 mm (1 ft 3 3/4 in) = 25 ridge tiles
- Verge tiles: verge length over the cover length of one tile, rounded up once 14.649 m (48 ft 3/4 in) ÷ 400 mm (1 ft 3 3/4 in) = 37 verge tiles
- Underlay rolls: roof area over the net cover of one roll, rounded up once 73.25 m² (788.42 ft²) ÷ 44.87 m² (482.92 ft²) = 2 rolls of underlay
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Waste allowance for the tiles (%) | 5% | |
| Default A common allowance, not a figure from a maker. Your supplier can say what they allow. It is added to the tiles once. | ||
| Marley Plain concrete tile, 100 mm gauge | 60 per m²[1] | |
| Marley's own page for its Plain concrete roof tile prints 60 tiles per square metre at a 100 mm roof gauge. | ||
| Underlay roll width | 1 m (3 ft 3 3/8 in, converted)[2] | |
| Klober's page lists the Permo Air 160 roof membrane in a roll of 50 m by 1.0 m (50 m²). | ||
| Underlay roll length | 50 m (164 ft 1/2 in, converted)[2] | |
| Klober's page lists the Permo Air 160 roof membrane in a roll of 50 m by 1.0 m (50 m²). | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Tiles per square metre, as the maker prints them
Rows: 4
Roof tiles per square metre printed by the maker, by tile
| Tile | Tiles per square metre |
|---|---|
| Marley Plain concrete tile, 100 mm gauge | 60 per m² (per Marley's product page, checked 13 Nov 2026) |
| Marley Plain concrete tile, 115 mm gauge | 53 per m² (per Marley's product page, checked 13 Nov 2026) |
| Marley Ludlow Major concrete tile, 75 mm headlap | 9.8 per m² (per Marley's product page, checked 14 Nov 2026) |
| Marley Ludlow Major concrete tile, 100 mm headlap | 10.6 per m² (per Marley's product page, checked 14 Nov 2026) |
Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.
The count here is the figure the calculator uses. Where a page prints a range, the higher end is counted so the order is never short, and the other end is shown in its own row.
Sources (3)
-
Marley Plain concrete roof tile (opens in new tab), Marley, Web page, no date printed.
Manufacturer data.
“60 tiles/m² at 100mm gauge (roof)”
“53 tiles/m² at 115mm gauge (vertical)”
Per Marley's product page, checked 13 Nov 2026. Figures and regulations change; verify with the source. Back to where this is used (Source 1) -
Permo Air 160 roof membrane (opens in new tab), Klober, Web page, no date printed.
Manufacturer data.
“50m x 1.0m (50m2) 50m x 1.50m (75m2)”
Per Klober's product page, checked 14 Nov 2026. Figures and regulations change; verify with the source. Back to where this is used (Source 2) -
Ludlow Major concrete interlocking roof tile (opens in new tab), Marley, Web page, no date printed.
Manufacturer data.
“Covering Capacity 9.8 tiles /m² at 75mm headlap 10.6 tiles /m² at 100mm headlap”
“2.9 lin.m/m² at 75mm headlap 3.1 lin.m/m² at 100mm headlap”
“Size of Tile 420mm x 330mm ... Maximum Gauge 345mm Cover Width 295mm (nominal)”
Per Marley's product page, checked 14 Nov 2026. Figures and regulations change; verify with the source. Back to where this is used (Source 3)
These are summaries of what the sources say, not professional advice. Rules and product data change. Check with your local building control office and the product label about your own project.
Sources
- [1] Marley, Marley Plain concrete roof tile. Checked 13 November 2026. https://www.marley.co.uk/products/concrete-tiles/plain
- [2] Klober, Permo Air 160 roof membrane. Checked 14 November 2026. https://klober.co.uk/membranes/roof-membranes/p/air-160
- [3] Marley, Ludlow Major concrete interlocking roof tile. Checked 14 November 2026. https://www.marley.co.uk/roof-tiles/concrete-roof-tiles/ludlow-major