Stair Calculator

Enter the total rise of your staircase and your own target riser height, and get the number of risers, the rise of each, the treads, the going and the length of the string, with every step of the working shown.

Estimates for planning, not professional advice. Read the full notice.

Stair size

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 2.7 metres, 8 feet 10 and 5 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 250 millimetres, 9 and 13 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 190 millimetres, 7 and 1 half inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 25 millimetres, 1 inch

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 900 millimetres, 2 feet 11 and 7 sixteenths inches

Your own board length; leave it empty to buy the pieces cut to length.

Risers

Example: Stair layout

Summary

Risers
15 × 180 mm
Treads
14 × 250 mm
Total going
3,500 mm
String (longest side)
4,313 mm
Bottom riser reduction
155 mm

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

Stair layout

Marks from the start

MarkReadsFrom
Riser 1180 mmthe floor
Riser 2360 mmthe floor
Riser 3540 mmthe floor
Riser 4720 mmthe floor
Riser 5900 mmthe floor
Riser 61,080 mmthe floor
Riser 71,260 mmthe floor
Riser 81,440 mmthe floor
Riser 91,620 mmthe floor
Riser 101,800 mmthe floor
Riser 111,980 mmthe floor
Riser 122,160 mmthe floor
Riser 132,340 mmthe floor
Riser 142,520 mmthe floor
Riser 152,700 mmthe floor
Tread 1250 mmthe first riser
Tread 2500 mmthe first riser
Tread 3750 mmthe first riser
Tread 41,000 mmthe first riser
Tread 51,250 mmthe first riser
Tread 61,500 mmthe first riser
Tread 71,750 mmthe first riser
Tread 82,000 mmthe first riser
Tread 92,250 mmthe first riser
Tread 102,500 mmthe first riser
Tread 112,750 mmthe first riser
Tread 123,000 mmthe first riser
Tread 133,250 mmthe first riser
Tread 143,500 mmthe first riser

Drawing

Side view of the string

A saw-tooth outline of 15 risers and 14 treads. The mark table lists every mark.

Scale 1:20 when printed at 100% (actual size).

Check this bar with a ruler: 100 mm.

Example: a staircase with a cut string

3 Stringers, cut to 4.313 m

  • Stringers 3 Stringers, cut to 4.313 m
  • Treads 14 Treads, cut to 0.9 m
  • Stringers, cut to 4.313 m 3
  • Treads, cut to 0.9 m 14

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How many risers does my staircase have?

    Divide the total rise by the maximum riser height you set and round up to a whole number of risers. The rise of each riser is the total rise divided by that number. The floor above is the top step, so there is one tread fewer than there are risers.

    How long is the string?

    The string is the longest side of a right-angled triangle. Its short sides are the rise below the top riser and the total going. The calculator shows the working and the angle the string makes.

    Why is the string cut down at the bottom?

    The first tread sits on top of the bottom cut of the string and adds its own thickness. The bottom is cut down by the rise of a riser minus the tread thickness, so the first riser is the same height as the rest.

    Which rise and going does the calculator use?

    Only the sizes you enter. It holds no fixed values and shows no limits or building rules: the maximum riser height and the going are your own choice.

    Can I print the marks?

    Yes. The page lists every mark from the floor and from the first riser, so you can print them and transfer them to the board.

    Worked example: a staircase with a cut string

    Show the working
    1. Risers: divide the total rise by the maximum riser height, then round up 2.7 m (8 ft 10 5/16 in) ÷ 190 mm (7 1/2 in) = 15 risers
    2. Riser height: the total rise divided by the number of risers 2.7 m (8 ft 10 5/16 in) ÷ 15 risers = 180 mm (7 1/16 in)
    3. Treads: one fewer than the risers, because the floor above is the top step 15 risers − 1 = 14 treads
    4. Total going: the number of treads times the going 14 treads × 250 mm (9 13/16 in) = 3.5 m (11 ft 5 13/16 in)
    5. Rise below the top riser: the total rise minus one riser 2.7 m (8 ft 10 5/16 in) − 180 mm (7 1/16 in) = 2.52 m (8 ft 3 3/16 in)
    6. String: the longest side of a right-angled triangle whose short sides are that rise and the total going 2.52 m (8 ft 3 3/16 in) = 4.313 m (14 ft 1 13/16 in)
    7. Bottom riser reduction: the riser minus the tread thickness 180 mm (7 1/16 in) − 25 mm (1 in) = 155 mm (6 1/8 in)

    Marks for this example

    Where to mark each riser and each going, measured from the floor and from the first riser

    Where to mark each riser and each going, measured from the floor and from the first riser
    MarkMeasurement
    Riser 1, from the floor 180 mm (7 1/16 in)
    Riser 2, from the floor 360 mm (1 ft 2 3/16 in)
    Riser 3, from the floor 540 mm (1 ft 9 1/4 in)
    Riser 4, from the floor 720 mm (2 ft 4 3/8 in)
    Riser 5, from the floor 900 mm (2 ft 11 7/16 in)
    Riser 6, from the floor 1.08 m (3 ft 6 1/2 in)
    Riser 7, from the floor 1.26 m (4 ft 1 5/8 in)
    Riser 8, from the floor 1.44 m (4 ft 8 11/16 in)
    Riser 9, from the floor 1.62 m (5 ft 3 3/4 in)
    Riser 10, from the floor 1.8 m (5 ft 10 7/8 in)
    Riser 11, from the floor 1.98 m (6 ft 5 15/16 in)
    Riser 12, from the floor 2.16 m (7 ft 1 1/16 in)
    Riser 13, from the floor 2.34 m (7 ft 8 1/8 in)
    Riser 14, from the floor 2.52 m (8 ft 3 3/16 in)
    Riser 15, from the floor 2.7 m (8 ft 10 5/16 in)
    Going 1, from the first riser 250 mm (9 13/16 in)
    Going 2, from the first riser 500 mm (1 ft 7 11/16 in)
    Going 3, from the first riser 750 mm (2 ft 5 1/2 in)
    Going 4, from the first riser 1 m (3 ft 3 3/8 in)
    Going 5, from the first riser 1.25 m (4 ft 1 3/16 in)
    Going 6, from the first riser 1.5 m (4 ft 11 1/16 in)
    Going 7, from the first riser 1.75 m (5 ft 8 7/8 in)
    Going 8, from the first riser 2 m (6 ft 6 3/4 in)
    Going 9, from the first riser 2.25 m (7 ft 4 9/16 in)
    Going 10, from the first riser 2.5 m (8 ft 2 7/16 in)
    Going 11, from the first riser 2.75 m (9 ft 1/4 in)
    Going 12, from the first riser 3 m (9 ft 10 1/8 in)
    Going 13, from the first riser 3.25 m (10 ft 7 15/16 in)
    Going 14, from the first riser 3.5 m (11 ft 5 13/16 in)

    Each mark is worked out from the whole rise or the whole going and rounded only at the end. Marks are never added up from the rounded rise of one riser, because that drifts out of line.

    Stairs for a range of total rises

    Riser height, risers, treads, total going and string for a range of total rises, with the going of this example

    Riser height, risers, treads, total going and string for a range of total rises, with the going of this example
    Total riseRiser heightRisersTreadsTotal goingString
    1.2 m (3 ft 11 1/4 in) 171.4 mm (6 3/4 in)7 risers6 treads1.5 m (4 ft 11 1/16 in)1.819 m (5 ft 11 5/8 in)
    1.8 m (5 ft 10 7/8 in) 180 mm (7 1/16 in)10 risers9 treads2.25 m (7 ft 4 9/16 in)2.773 m (9 ft 1 1/8 in)
    2.4 m (7 ft 10 1/2 in) 184.6 mm (7 1/4 in)13 risers12 treads3 m (9 ft 10 1/8 in)3.729 m (12 ft 2 13/16 in)
    2.6 m (8 ft 6 3/8 in) 185.7 mm (7 5/16 in)14 risers13 treads3.25 m (10 ft 7 15/16 in)4.049 m (13 ft 3 3/8 in)
    2.75 m (9 ft 1/4 in) 183.3 mm (7 3/16 in)15 risers14 treads3.5 m (11 ft 5 13/16 in)4.34 m (14 ft 2 7/8 in)
    3 m (9 ft 10 1/8 in) 187.5 mm (7 3/8 in)16 risers15 treads3.75 m (12 ft 3 5/8 in)4.687 m (15 ft 4 9/16 in)

    Each row uses the going, the tread thickness and the maximum riser height of this example. These are the example's own sizes, not rules.