Timber Volume Calculator

Enter the thickness, width and length of the timber and how many pieces, and get the volume of one piece and of the whole list in cubic metres, with the pieces to order and a waste allowance on the total. The lengths are ones you type.

Estimates for planning, not professional advice. Read the full notice.

One section of timber (the pieces are counted with the plus and minus below)

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 50 millimetres, 1 and 15 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 100 millimetres, 3 and 15 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 4.8 metres, 15 feet 9 inches

Example: a list of timber

0.48 m³ (0.63 yd³) to order (0.48 m³ exact)

  • Volume of one piece, in cubic metres 0.024 m³ (0.8476 ft³)
  • Volume of all the pieces, in cubic metres 0.48 m³ (16.951 ft³)

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Timber 50 × 100 mm, 4.8 m 20 pieces
  • Timber volume, rounded up once, 1 m³ (1.31 yd³) 0.48 m³ (0.63 yd³)

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How do I work out the volume of timber in cubic metres?

    Multiply the thickness, the width and the length, all in metres, for one piece, then multiply by the number of pieces. The calculator takes the sizes in millimetres and metres and shows each step.

    Why is the volume rounded up?

    Timber is ordered by the piece or by the cubic metre. The calculator keeps the exact volume through the working and rounds up once at the end, to a thousandth of a cubic metre, so the figure never falls short.

    Are the sizes the sawn or the planed sizes?

    The calculator uses the sizes you type, as given. If your timber is sold by a nominal size and planed smaller, enter the size you will receive.

    Worked example: a list of timber

    Show the working
    1. One piece: thickness times width times length 50 mm (1 15/16 in) × 100 mm (3 15/16 in) × 4.8 m (15 ft 9 in) = 0.024 m³ (0.8476 ft³)
    2. All the pieces: the volume of one piece times the number of pieces 0.024 m³ (0.8476 ft³) × 20 pieces = 0.48 m³ (16.951 ft³)
    3. Round up once, to the ordering step of a thousandth of a cubic metre 0.48 m³ (16.951 ft³) = 0.48 m³ (0.63 yd³)

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance 0%
    Default Your own allowance, added once to the total. Check your label or supplier.

    Timber volume by length

    Volume of one piece and of the whole list in cubic metres, for the section in the example, by length

    Volume of one piece and of the whole list in cubic metres, for the section in the example, by length
    LengthOne pieceAll the pieces
    2.4 m 0.012 m³ (0.4238 ft³)0.24 m³ (8.476 ft³)
    3 m 0.015 m³ (0.5297 ft³)0.3 m³ (10.594 ft³)
    3.6 m 0.018 m³ (0.6357 ft³)0.36 m³ (12.713 ft³)
    4.2 m 0.021 m³ (0.7416 ft³)0.42 m³ (14.832 ft³)
    4.8 m 0.024 m³ (0.8476 ft³)0.48 m³ (16.951 ft³)
    6 m 0.03 m³ (1.0594 ft³)0.6 m³ (21.189 ft³)

    The lengths are examples; type the length you are buying. Each row is worked out on its own, with no waste added.