Laminate Flooring Calculator
HoneyDoMath.eu
Enter the room, the coverage on your laminate pack and a waste allowance to get the packs to buy, rounded up once. The plank size and expansion gap are fields for your own layout and do not change the count.
A ready-made setup of the Flooring Calculator.
Estimates for planning, not professional advice. Read the full notice.
The drawing did not open. Length and width are still here.
Room: shape and size
Skip the drawingDrag a round corner to move it. The small hollow diamond on a side is its curve handle: drag it across the side to curve the side (it is not a corner). To add a corner (a new point), tap the side itself, then choose Add a point here. Tapping a corner or a side opens its actions. Drag empty space to move the view; pinch, or Ctrl and the mouse wheel, to zoom. The keys are listed under Keys.
Keys
- Tab
- next corner; each says how far it is from corner 1
- Arrow keys on a corner
- move it one square; ten with Shift; 1 mm with Alt
- Delete or Backspace
- remove the corner; its two sides join in one straight side
- + on a corner
- add a corner halfway along the next side
- Arrow keys on the drawing
- move the view; further with Shift
- + and - on the drawing
- zoom in and out
- 0 on the drawing
- show the whole shape
- Ctrl+Z (Cmd+Z on a Mac)
- undo, except inside a typed field (it keeps its own)
- Ctrl+Shift+Z or Ctrl+Y
- redo
- Escape while dragging
- put it back where it was
- Enter on a corner or side
- go to its actions
- Escape in the actions
- close them and go back to the drawing
The drawing did not load. Check your connection and try again.
- Area
- 17.5 m² (188.37 ft²)
- Perimeter
- 17 m (55 ft 9 5/16 in)
- Cut-out edges
No area until the shape is fixed.
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Shape: Rectangle Change
Sides
Corners
Cut-outs
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Example: a laminate living room floor
10 packs of laminate flooring
- Floor area 17.5 m² (188.37 ft²)
- Area with the waste allowance, before rounding 19.25 m² (207.21 ft²)
- Flooring bought 20 m² (215.28 ft²)
- Bought beyond the floor's own area 2.5 m² (26.91 ft²)
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Flooring (packs) 10
Questions
How many packs of laminate do I need?
Enter the room's length and width and the coverage printed on your pack. The calculator adds your waste allowance once to the floor area, divides by the pack coverage and rounds up once to whole packs.
Does the gap around the edge change the pack count?
No. The gap is a field for your own layout, shown beside the result and not taken off the area, so the pack count follows the room's full area.
Worked example: a laminate living room floor
Show the working
- Area: length times width 5 m (16 ft 4 7/8 in) × 3.5 m (11 ft 5 13/16 in) = 17.5 m² (188.37 ft²)
- Add the waste allowance, once 17.5 m² (188.37 ft²) × 1.1 = 19.25 m² (207.21 ft²)
- Divide by the coverage of one pack 19.25 m² (207.21 ft²) ÷ 2 m² (21.53 ft²) = 9.63 packs
- Round up once, to whole packs 9.63 packs = 10 packs of laminate flooring
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Waste allowance | 10% | |
| Default A typical allowance for a straight layout, added once. It is your own figure: change it for your layout. | ||
| Coverage of one pack | No default | |
| Default From the pack label. Check your label or supplier. | ||
| Plank size | No default | |
| Default It does not change the count, which follows the pack coverage. Check your label or supplier. | ||
| Expansion gap | No default | |
| Default Shown for your own layout; it does not change the pack count. Check your label or supplier. | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Packs for common room sizes
Packs for common room sizes at an example pack coverage, with the waste allowance added once
| Room | Floor area | Packs at 2.2 m² a pack (example) |
|---|---|---|
| 3 × 3 m | 9 m² (96.88 ft²) | 5 |
| 3 × 4 m | 12 m² (129.17 ft²) | 6 |
| 4 × 4 m | 16 m² (172.22 ft²) | 8 |
| 4 × 5 m | 20 m² (215.28 ft²) | 10 |
| 5 × 6 m | 30 m² (322.92 ft²) | 15 |
| 6 × 8 m | 48 m² (516.67 ft²) | 24 |
The pack coverage is an example, not a product's. Your own label gives the real coverage, so enter it in the field above for your count.