Topsoil Calculator

Enter the length, width and depth of your lawn or bed and get the topsoil in cubic metres and in litres, with every step of the working shown.

A ready-made setup of the Soil Calculator.

Estimates for planning, not professional advice. Read the full notice.

Sizes

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 6 metres, 19 feet 8 and 1 quarter inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 4 metres, 13 feet 1 and 1 half inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 100 millimetres, 3 and 15 sixteenths inches

Example: a lawn patch

2.5 m³ (3.27 yd³) to order (2.4 m³ exact)

  • The same volume in litres 2,400 L
  • Cubic metres at the supplier's minimum order 2.5 m³ (88.29 ft³)
  • Topsoil, 1 m³ (1.31 yd³) 2.5 m³ (3.27 yd³)

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How do I work out how much topsoil I need?

    Multiply the length and width in metres to get the area, then multiply by the depth in metres. A depth in millimetres is changed to metres first. The result is in cubic metres, and the calculator shows the same volume in litres.

    How deep should the topsoil be?

    That depends on the job and on your supplier, so the depth is yours to enter and this page quotes none. Change the depth and every figure on the page follows.

    How many bags of topsoil do I need?

    Bags are sold in litres, so divide the litres of topsoil you need by the size on the label and round up once, to a whole bag. The bag size is yours to enter, because this page quotes no bag size.

    How many litres are in a cubic metre?

    The working above multiplies the cubic metres by the thousand litres in a cubic metre and shows the result as the litres line.

    Worked example: a lawn patch

    Show the working
    1. Patch area 6 m (19 ft 8 1/4 in) × 4 m (13 ft 1 1/2 in) = 24 m² (258.33 ft²)
    2. Topsoil volume at the depth 24 m² (258.33 ft²) × 100 mm (3 15/16 in) (0.1 m) = 2.4 m³ (84.76 ft³)
    3. Litres: multiply by the litres in a cubic metre 2.4 m³ (84.76 ft³) × 1,000 L in a m³ = 2,400 L
    4. Round up once, to the supplier's minimum order 2.4 m³ (84.76 ft³) = 2.5 m³ (88.29 ft³)

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance 0%
    Default No allowance unless you enter one. Check your label or supplier.
    Supplier's minimum order, in cubic metres 0.25 m³ (8.83 ft³, converted)
    Default Suppliers sell loose material in set amounts. This amount is an example value: check your supplier.

    Lawn and bed jobs

    Topsoil in cubic metres and litres for lawn and bed jobs

    Topsoil in cubic metres and litres for lawn and bed jobs
    Job (size × depth)VolumeLitres
    Patch 3 m × 3 m × 100 mm 0.9 m³ (31.78 ft³)900 L
    Bed 3.6 m × 1.2 m × 150 mm 0.65 m³ (22.88 ft³)648 L
    Lawn 10 m × 8 m × 75 mm 6 m³ (211.89 ft³)6,000 L

    Each row is worked out on its own, from the area and the depth. The sizes are examples to replace with your own, with no claim about what a lawn or bed needs.