LVT Flooring Calculator

Enter the room, the coverage on your LVT pack and a waste allowance to get the packs to buy, rounded up once. The table counts the example floor at four allowances of your own.

A ready-made setup of the Flooring Calculator.

Estimates for planning, not professional advice. Read the full notice.

Room and pack

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 6 metres, 19 feet 8 and 1 quarter inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 4.8 metres, 15 feet 9 inches

Like 11 m²

reads as 2.2 square metres, 23.68 square feet

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Example: an LVT floor in a living area

15 packs of LVT flooring

  • Floor area 28.8 m² (310 ft²)
  • Area with the waste allowance, before rounding 31.68 m² (341 ft²)
  • Flooring bought 33 m² (355.21 ft²)
  • Bought beyond the floor's own area 4.2 m² (45.21 ft²)
  • Flooring (packs) 15

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How many packs of LVT do I need?

    Enter the room's length and width and the coverage printed on your pack. The calculator adds the waste allowance once to the area, divides by the pack coverage and rounds up once. A large open area is counted the same way as a small room.

    How much extra LVT should I buy?

    The waste allowance is a field you can change, and the table shows the packs at four allowances for the example floor. The calculator lets you type your own waste allowance.

    Can I draw an L-shaped room?

    Choose Draw a shape above the fields to draw the outline. The area then replaces the length and width, and the pack count follows that area.

    Worked example: an LVT floor in a living area

    Show the working
    1. Area: length times width 6 m (19 ft 8 1/4 in) × 4.8 m (15 ft 9 in) = 28.8 m² (310 ft²)
    2. Add the waste allowance, once 28.8 m² (310 ft²) × 1.1 = 31.68 m² (341 ft²)
    3. Divide by the coverage of one pack 31.68 m² (341 ft²) ÷ 2.2 m² (23.68 ft²) = 14.4 packs
    4. Round up once, to whole packs 14.4 packs = 15 packs of LVT flooring

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance 10%
    Default A typical allowance for a straight layout, added once. It is your own figure: change it for your layout.
    Coverage of one pack No default
    Default From the pack label. Check your label or supplier.
    Plank size No default
    Default It does not change the count, which follows the pack coverage. Check your label or supplier.
    Expansion gap No default
    Default Shown for your own layout; it does not change the pack count. Check your label or supplier.

    Packs by waste allowance

    Packs of LVT flooring for the example floor at four waste allowances, each worked on its own

    Packs of LVT flooring for the example floor at four waste allowances, each worked on its own
    Waste allowanceFlooring with wastePacks
    0% 28.8 m² (310 ft²)14
    5% 30.24 m² (325.5 ft²)14
    10% 31.68 m² (341 ft²)15
    15% 33.12 m² (356.5 ft²)16

    No maker's figure is printed here, so these are your own allowances. Each row adds its allowance once, then rounds up to whole packs.