Concrete Calculator
HoneyDoMath.eu
Enter the length, width and depth of a slab and get the concrete to buy, in cubic metres and in bags, plus the volume of the sub-base under it, with every step shown. A slab that is not a rectangle can be drawn with Draw a shape.
Estimates for planning, not professional advice. Read the full notice.
The drawing did not open. Length and width are still here.
Base: shape and size
Skip the drawingDrag a round corner to move it. The small hollow diamond on a side is its curve handle: drag it across the side to curve the side (it is not a corner). To add a corner (a new point), tap the side itself, then choose Add a point here. Tapping a corner or a side opens its actions. Drag empty space to move the view; pinch, or Ctrl and the mouse wheel, to zoom. The keys are listed under Keys.
Keys
- Tab
- next corner; each says how far it is from corner 1
- Arrow keys on a corner
- move it one square; ten with Shift; 1 mm with Alt
- Delete or Backspace
- remove the corner; its two sides join in one straight side
- + on a corner
- add a corner halfway along the next side
- Arrow keys on the drawing
- move the view; further with Shift
- + and - on the drawing
- zoom in and out
- 0 on the drawing
- show the whole shape
- Ctrl+Z (Cmd+Z on a Mac)
- undo, except inside a typed field (it keeps its own)
- Ctrl+Shift+Z or Ctrl+Y
- redo
- Escape while dragging
- put it back where it was
- Enter on a corner or side
- go to its actions
- Escape in the actions
- close them and go back to the drawing
The drawing did not load. Check your connection and try again.
- Area
- 12 m² (129.17 ft²)
- Perimeter
- 14 m (45 ft 11 3/16 in)
- Cut-out edges
No area until the shape is fixed.
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Shape: Rectangle Change
Sides
Corners
Cut-outs
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.
Example: a garden slab
132 20 kg (44.1 lb) bags
- Concrete in the slab 1.2 m³ (42.38 ft³)
- Sub-base, in place 1.2 m³ (42.38 ft³)
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Concrete mix, 20 kg (44.1 lb) bag 132
Questions
How much concrete do I need for a slab?
Multiply the length, width and depth to get the volume, add a waste allowance, and read the result in cubic metres or bags. The calculator shows every step for a slab of your size.
How do I calculate concrete for a garden slab?
The example on this page is a garden slab. Enter your own length, width and depth to see the volume and the bags for your size.
What is the sub-base under a concrete base?
It is a layer of compacted hardcore or crushed stone that the concrete sits on. This page shows its volume in place, from the base's own footprint and the depth you enter, so you can carry it over to the calculator for the material you order it in.
Is the sub-base part of the concrete count?
The sub-base is stone, not concrete, so the concrete count here covers only the base. The sub-base volume is shown on its own line.
Where do the bag yields come from?
From the bag maker's own data sheet, listed under Sources with the date it was checked. Other mixes and other makers can yield differently, so read your own bag's label.
Worked example: a garden slab
Show the working
- Slab area 3 m (9 ft 10 1/8 in) × 4 m (13 ft 1 1/2 in) = 12 m² (129.17 ft²)
- Slab volume 12 m² (129.17 ft²) × 100 mm (3 15/16 in) (0.1 m) = 1.2 m³ (42.38 ft³)
- Add the waste allowance 1.2 m³ (42.38 ft³) + 10% = 1.32 m³ (46.62 ft³)
- Divide by the bag's yield 1.32 m³ (46.62 ft³) ÷ 0.01 m³ (0.35 ft³, converted)[1] = 132 bags
- Round up once, to whole bags 132 bags = 132 × 20 kg (44.1 lb) bags
- Sub-base volume, in place 12 m² (129.17 ft²) × 100 mm (3 15/16 in) (0.1 m) = 1.2 m³ (42.38 ft³)
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Waste allowance (your own figure) | 10% | |
| Default Your own figure, not a sourced one. 10% is only the starting value; set the allowance you want. | ||
| Yield of the 20 kg bag | 0.01 m³ (0.35 ft³, converted)[1] | |
| One 20 kg bag of Blue Circle Multi-Purpose Concrete typically makes around 0.01 m³ of fresh concrete. | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Slab jobs
Concrete volume, bags and sub-base volume for common slab jobs
| Job (sizes) | Slab volume, without waste | To order, with waste | In 20 kg bags | Sub-base, in place |
|---|---|---|---|---|
| Round slab, 3 m across × 100 mm | 0.71 m³ (24.96 ft³) | 0.78 m³ (27.46 ft³) | 78 × 20 kg (44.1 lb) bags | 0.71 m³ (24.96 ft³) |
| Path, 5 m × 1 m × 75 mm | 0.38 m³ (13.24 ft³) | 0.41 m³ (14.57 ft³) | 42 × 20 kg (44.1 lb) bags | 0.5 m³ (17.66 ft³) |
| Drive, 6 m × 3 m × 150 mm | 2.7 m³ (95.35 ft³) | 2.97 m³ (104.88 ft³) | 297 × 20 kg (44.1 lb) bags | 1.8 m³ (63.57 ft³) |
The waste allowance in the assumptions above is added once and the bags are rounded up once. The sub-base column uses the sub-base depth from the example and is a volume in place, with no waste allowance.
Volume by shape
Concrete volume and bags to buy for common shapes
| Shape and sizes | Volume, without waste | To order, with waste | In 20 kg bags |
|---|---|---|---|
| Footing, 12 m × 450 mm × 250 mm | 1.35 m³ (47.67 ft³) | 1.49 m³ (52.44 ft³) | 149 × 20 kg (44.1 lb) bags |
| Square column, 400 mm × 400 mm × 2.4 m | 0.38 m³ (13.56 ft³) | 0.42 m³ (14.92 ft³) | 43 × 20 kg (44.1 lb) bags |
| Steps, 3 risers of 175 mm with 275 mm treads, 1.2 m wide, 900 mm platform | 0.74 m³ (26.14 ft³) | 0.81 m³ (28.76 ft³) | 82 × 20 kg (44.1 lb) bags |
| Round base, 3 m across × 100 mm | 0.71 m³ (24.96 ft³) | 0.78 m³ (27.46 ft³) | 78 × 20 kg (44.1 lb) bags |
Each shape is worked out on its own here. In the calculator the shapes of one pour are added together first, then the waste allowance is added once and the bags are rounded up once.
Bagged concrete by maker
Rows: 3
What one bag yields and the bags for one cubic metre, for each maker's bagged concrete
| Product and bag size | Yield per bag | Bags for 1 m³ |
|---|---|---|
| Blue Circle High Strength Concrete (40N) 20 kg | 0.01 m³ (0.35 ft³, converted) (per Blue Circle's data sheet, checked 12 Nov 2026) | 100 × 20 kg (44.1 lb) bags |
| Blue Circle Multi-Purpose Concrete 20 kg | 0.01 m³ (0.35 ft³, converted) (per Blue Circle's data sheet, checked 12 Nov 2026) | 100 × 20 kg (44.1 lb) bags |
| Holcim High Performance Concrete 20 kg | approx. 0.01 m³ (0.35 ft³, converted) (per Holcim's data sheet, checked 12 Nov 2026) | 100 × 20 kg (44.1 lb) bags |
Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.
The list is in alphabetical order by maker. The yield is the maker's own figure and the bags for one cubic metre are rounded up once, with no waste allowance. Your bag's label comes first.
Sources (3)
-
Multi-Purpose Concrete Product Data Sheet (opens in new tab), Tarmac Trading Limited (Blue Circle), December 2023.
Manufacturer data.
“One 20kg bag will typically produce around 0.01 m3 of fresh concrete (0.33m x 0.33m x 0.1m).”
Per Blue Circle's data sheet, checked 12 Nov 2026. Figures and regulations change; verify with the source. Back to where this is used (Source 1) -
High Strength Concrete (40N) Product Data Sheet (opens in new tab), Tarmac Trading Limited (Blue Circle), December 2023.
Manufacturer data.
“One 20kg bag will typically produce around 0.01 m3 of fresh concrete (0.33m x 0.33m x 0.1m).”
Per Blue Circle's data sheet, checked 12 Nov 2026. Figures and regulations change; verify with the source. Back to where this is used (Source 2) -
40N High Performance Concrete technical data sheet (opens in new tab), Holcim UK, April 2025.
Manufacturer data.
“One 20kg bag will yield approximately 0.01m3 of concrete, sufficient cover approximately 0.2m2 at 50mm depth.”
Per Holcim's data sheet, checked 12 Nov 2026. Figures and regulations change; verify with the source. Back to where this is used (Source 3)
These are summaries of what the sources say, not professional advice. Rules and product data change. Check with your local building control office and the product label about your own project.
Sources
- [1] Blue Circle, Multi-Purpose Concrete Product Data Sheet. Checked 12 November 2026. https://uploadstarmaccom.blob.core.windows.net/bluecircle/sites/76/2024/03/BC_MultiPurposeConcrete_TechINFO_SVD1223.pdf
- [2] Blue Circle, High Strength Concrete (40N) Product Data Sheet. Checked 12 November 2026. https://uploadstarmaccom.blob.core.windows.net/bluecircle/sites/76/2024/03/BC_HighStrengthConcrete40N_TechINFO_SVD1223.pdf
- [3] Holcim, 40N High Performance Concrete technical data sheet. Checked 12 November 2026. https://www.holcim.co.uk/sites/uk/files/docs/hol8049_high-performance-concrete-tds-v2.pdf