Self-Levelling Compound Calculator

Enter the area of a floor and the thickness of the pour and get the bags of self-levelling compound to buy, at the yield you type from your bag. A floor that is not a rectangle can be drawn with Draw a shape.

Estimates for planning, not professional advice. Read the full notice.

Floor size

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 4 metres, 13 feet 1 and 1 half inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3 metres, 9 feet 10 and 1 eighth inches

Check your bag for the range it can be poured in.

reads as 5 millimetres, 3 sixteenths of an inch

Example: a floor to level

5 25 kg (55.1 lb) bags

  • Compound to pour 60 L
  • Self-levelling compound, 25 kg (55.1 lb) bag 5

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How much self-levelling compound do I need?

    Area times thickness gives the volume to pour; dividing by the volume one bag makes gives the bags, rounded up once. The table on this page shows the bags for twenty square metres at several thicknesses.

    Where does the yield come from?

    From your bag. No maker's figure is built into this page, so the yield is an example you replace with the one printed on the bag or the data sheet.

    Is a thinner pour counted differently?

    No. The calculator multiplies the area by the thickness, adds the allowance for waste if you enter one, divides by the bag's yield and rounds up once, at the bag.

    Worked example: a floor to level

    Show the working
    1. Floor area 4 m (13 ft 1 1/2 in) × 3 m (9 ft 10 1/8 in) = 12 m² (129.17 ft²)
    2. Volume to pour 12 m² (129.17 ft²) × 5 mm (3/16 in) (0.01 m) = 60 L
    3. Divide by the volume one bag makes 60 L ÷ 14 L = 4.29 bags
    4. Round up once, to whole bags 4.29 bags = 5 × 25 kg (55.1 lb) bags

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Self-levelling compound allowance for waste 0%
    Default No hidden extra. Check your bag or supplier.
    Volume one bag makes, from your bag 14 L
    Default An example value, not a maker's figure. Replace it with the yield printed on your bag.

    Bags for twenty square metres, by thickness

    Litres to pour and bags for twenty square metres at several thicknesses, at the example yield

    Litres to pour and bags for twenty square metres at several thicknesses, at the example yield
    ThicknessLitres to pourBags
    2 mm (1/16 in) 40 L3 × 25 kg (55.1 lb) bags
    3 mm (1/8 in) 60 L5 × 25 kg (55.1 lb) bags
    5 mm (3/16 in) 100 L8 × 25 kg (55.1 lb) bags
    8 mm (5/16 in) 160 L12 × 25 kg (55.1 lb) bags
    10 mm (3/8 in) 200 L15 × 25 kg (55.1 lb) bags

    The yield is an example value: replace it in the assumptions with the figure on your bag and the table changes with it. Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.