Ramp Calculator

Enter the rise, the slope you choose and the greatest rise of one run, and get the ramp runs counted. The run length, slope length, angle and landings are worked out in the example and table. The slope, the greatest rise and the landing are your own figures; the ones shown are examples and no regulation figure is used.

Estimates for planning, not professional advice. Read the full notice.

Ramp size

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 600 millimetres, 1 foot 11 and 5 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 400 millimetres, 1 foot 3 and 3 quarters inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 1.2 metres, 3 feet 11 and 1 quarter inches

Example: a sixty centimetre rise

2 ramp runs

  • Run for the whole rise 7.2 m (23.62 ft)
  • Slope length 7.22 m (23.7 ft)
  • Angle 4.76 degrees
  • Slope as a percentage 8.33%
  • Landings 1 landing

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

Run, length, angle and runs

These numbers follow the sizes above for every item in the list.

  • Ramp runs 2

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How long is a ramp for a given rise?

    The run is the rise times the run for each unit of rise of the slope you choose. The table lists runs and lengths for six rises at the example slope.

    How many runs and landings does a higher ramp take?

    A higher rise is split into equal runs, each no higher than the greatest rise you type, with a landing between each pair. Check the rules that apply to your home for the figures to use.

    Worked example: a sixty centimetre rise

    Show the working
    1. Run: the rise times the run for each unit of rise 600 mm (1 ft 11 5/8 in) × 12 = 7.2 m (23.62 ft)
    2. Slope length: the square root of the rise squared plus the run squared, √(rise² + run²) 0.36 m² (3.88 ft²) + 51.84 m² (558 ft²) = 7.22 m (23.7 ft)
    3. Runs: the rise over the greatest rise of one run, rounded up 600 mm (1 ft 11 5/8 in) ÷ 400 mm (1 ft 3 3/4 in) = 2 ramp runs

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes

    Run and length by rise

    Run, slope length, runs, landings and total length for six rises at the example slope, greatest rise and landing length

    Run, slope length, runs, landings and total length for six rises at the example slope, greatest rise and landing length
    RiseRunSlope lengthRunsLandingsTotal length with landings
    20 cm 2.4 m (7.87 ft)2.41 m (7.9 ft)1 run0 landings2.4 m (7.87 ft)
    40 cm 4.8 m (15.75 ft)4.82 m (15.8 ft)1 run0 landings4.8 m (15.75 ft)
    60 cm 7.2 m (23.62 ft)7.22 m (23.7 ft)2 runs1 landing8.4 m (27.56 ft)
    80 cm 9.6 m (31.5 ft)9.63 m (31.61 ft)2 runs1 landing10.8 m (35.43 ft)
    100 cm 12 m (39.37 ft)12.04 m (39.51 ft)3 runs2 landings14.4 m (47.24 ft)
    120 cm 14.4 m (47.24 ft)14.45 m (47.41 ft)3 runs2 landings16.8 m (55.12 ft)

    Each row is worked out on its own. The total length is the runs and the landings laid end to end, level distance.