Decking Oil Calculator

Enter the length and width of the deck, the coats and the area one litre covers from your tin, and get the litres of decking oil, rounded up once to whole tins of the size you buy. The coverage options are examples; your tin gives its own figure.

Estimates for planning, not professional advice. Read the full notice.

Surface to oil

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 4.8 metres, 15 feet 9 inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3.6 metres, 11 feet 9 and 3 quarters inches

Example: a deck top

2 2.5 L tins

  • Oil needed, in litres, before rounding to tins 3.46 L

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Decking oil, 2.5 L tin 2

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How much decking oil do I need?

    Multiply the area by the coats and divide by the coverage of one litre on your tin, then round up to whole tins. The example shows each step with example figures; your tin gives the real coverage.

    Why does the coverage change so much?

    Coverage depends on the oil and on the wood, and rough or weathered boards take more. That is why the calculator asks for a coverage from your own tin instead of assuming one.

    Worked example: a deck top

    Show the working
    1. Area of the deck top 4.8 m (15 ft 9 in) × 3.6 m (11 ft 9 3/4 in) = 17.28 m² (186 ft²)
    2. Litres: the area times the coats, over the coverage of one litre 17.28 m² (186 ft²) × 2 coats ÷ 10 m² (108 ft²) = 3.46 L
    3. Round up once, to whole tins 3.46 L = 2 × 2.5 L tins

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes

    Litres of oil by deck size and coverage

    Litres of oil for the top of a deck at two coats, by deck size and by the coverage of one litre, with the tins at the middle coverage

    Litres of oil for the top of a deck at two coats, by deck size and by the coverage of one litre, with the tins at the middle coverage
    Deck topLitres at the first coverageLitres at the middle coverageLitres at the last coverageTins at the middle coverage
    3 × 3 m 2.25 L1.8 L1.5 L1 × 2.5 L tin
    3.6 × 4.8 m 4.32 L3.46 L2.88 L2 × 2.5 L tins
    4 × 6 m 6 L4.8 L4 L2 × 2.5 L tins
    5 × 6 m 7.5 L6 L5 L3 × 2.5 L tins
    6 × 8 m 12 L9.6 L8 L4 × 2.5 L tins

    The coverages are examples. The litres are exact; the tins are rounded up once. Your own tin gives its own coverage.