Stairs With Landing Calculator
HoneyDoMath.eu
Enter the total rise, your maximum riser height, the going and the landing size to get the risers, treads, run and string length of each flight and the height of the landing. The stairs with a landing calculator makes no regulation claim.
A ready-made setup of the Stair Calculator.
Estimates for planning, not professional advice. Read the full notice.
Example: a stair with a landing
4 stair strings
- Risers in the whole stair 15 risers
- Riser height 0.18 m (7.087 in)
- Risers below the landing 7 risers
- Risers above the landing 8 risers
- Landing height 1.26 m (4 ft 1 5/8 in)
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Stair strings, 2.4 m 4
Questions
How are the risers split between the two flights?
The whole stair has the fewest risers that keep each riser at or under your maximum riser height, and every riser is the total rise over that count. By default half the risers go below the landing; choose a number of risers below the landing to move it.
Why does each flight have one tread fewer than risers?
The landing is a tread level, so the lower flight ends on it, and the upper flight ends at the floor above on a standard mount. A flush mount puts the top tread on the string.
Worked example: a stair with a landing
Show the working
- Risers of the whole stair: the total rise over the maximum riser height, rounded up 2.7 m (8 ft 10 5/16 in) ÷ 0.19 m (7.48 in) = 15 risers
- Riser height: the total rise over those risers 2.7 m (8 ft 10 5/16 in) ÷ 15 risers = 0.18 m (7.087 in)
- Landing height: the risers below it times the riser height 7 risers × 0.18 m (7.087 in) = 1.26 m (4 ft 1 5/8 in)
- Run: each flight's treads times the going, plus the landing depth 13 treads × 0.25 m (9.843 in) + 0.9 m (35.433 in) = 4.15 m (13 ft 7 3/8 in)
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Maximum riser height | 190 mm (7 1/2 in, converted) | |
| Default Your own target; the figure shown is an example, not a rule. Check your label or supplier. | ||
| Going | No default | |
| Default The depth of a tread. Check your label or supplier. | ||
| Landing depth and width | No default | |
| Default Your own landing size. Check your label or supplier. | ||
| String lengths | No default | |
| Default The board lengths you can buy. Check your label or supplier. | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Each flight, figure by figure
Risers, riser height, treads, run and string length for the lower and upper flight of the example stair
| Figure | Lower flight | Upper flight |
|---|---|---|
| Risers | 7 | 8 |
| Riser height | 0.18 m (7.087 in) | 0.18 m (7.087 in) |
| Treads | 6 | 7 |
| Run of the flight | 1.5 m (4 ft 11 1/16 in) | 1.75 m (5 ft 8 7/8 in) |
| String length with the cut allowance | 1.848 m (6 ft 3/4 in) | 2.156 m (7 ft 7/8 in) |
Every riser is the total rise over the risers of the whole stair. The landing is a tread level, so each flight has one tread fewer than its risers. The string length is geometry only; no board is sized.