Wall Panelling Calculator

Enter a wall's length, the panelling height, the stile and rail widths and the largest panel you want, and get the picture-frame panels, their clear width and the frame boards to buy, wall by wall.

Estimates for planning, not professional advice. Read the full notice.

Wall and frame

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3.6 metres, 11 feet 9 and 3 quarters inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 900 millimetres, 2 feet 11 and 7 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 80 millimetres, 3 and 1 eighth inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 140 millimetres, 5 and 1 half inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 90 millimetres, 3 and 9 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 600 millimetres, 1 foot 11 and 5 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 2.4 metres, 7 feet 10 and 1 half inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Example: a wall with picture-frame panelling

6 frame boards

  • Panels 6 panels
  • Stiles 7 stiles
  • Clear width of each panel 0.507 m (1.662 ft)

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Frame boards (stiles and panel rails), 2.4 m 6
  • Base rail boards, 2.4 m 2
  • Cap rail boards, 2.4 m 2

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How do I work out panels for wall panelling?

    Lay a stile at each end and between the panels, so the stiles are one more than the panels. The calculator finds the fewest panels whose clear width stays under your largest panel and shows that width.

    How is this different from board and batten?

    Board and batten gives batten marks across a wall. This page lays out panels between stiles and counts frame parts.

    Worked example: a wall with picture-frame panelling

    Show the working
    1. Width the stiles take: one more stile than panels 7 stiles × 80 mm (3 1/8 in) = 560 mm (1 ft 10 1/16 in)
    2. Wall left for panels 3.6 m (11 ft 9 3/4 in) − 560 mm (1 ft 10 1/16 in) = 3.04 m (9 ft 11 11/16 in)
    3. Clear width of each panel 3.04 m (9 ft 11 11/16 in) ÷ 6 panels = 0.507 m (1.662 ft)
    4. Frame boards from stock: stiles and panel rails, rounded up once per piece length 7 stiles = 6 frame boards

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Stile width 80 mm (3 1/8 in, converted)
    Default An example value, not a maker's figure. Check the maker's sheet or your supplier and type your own.
    Largest panel width 600 mm (1 ft 11 5/8 in, converted)
    Default An example value, not a maker's figure. Check the maker's sheet or your supplier and type your own.