Reinforcement Mesh Calculator

Enter a slab's length and width and the size of your mesh sheet and its lap, and get the sheets to lay, rounded up once, with the working shown for an example slab. The sheet size and the lap are yours to type from the label; no mesh designation is chosen here.

Estimates for planning, not professional advice. Read the full notice.

Slab, sheet and lap

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 4 metres, 13 feet 1 and 1 half inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3 metres, 9 feet 10 and 1 eighth inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 4.8 metres, 15 feet 9 inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 2.4 metres, 7 feet 10 and 1 half inches

From your supplier or the design for the slab. The figure shown is an example.

reads as 200 millimetres, 7 and 7 eighths inches

Example: a slab

2 sheets

  • Sheets laid with their laps 2 sheets
  • Sheets by area, with laps 2 sheets
  • Sheets by area, without laps 2 sheets

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Reinforcement mesh sheets 2

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How many mesh sheets do I need for a slab?

    Type the slab's size, the size of one sheet and the lap between sheets. The calculator lays whole sheets with the lap and rounds up once; the table also shows the count from the area alone.

    Does it choose the mesh or the reinforcement?

    No. It counts sheets from the sizes you type. Which mesh a slab needs comes from its design, not from this calculator.

    Worked example: a slab

    Show the working
    1. Slab area: length times width 4 m (13 ft 1 1/2 in) × 3 m (9 ft 10 1/8 in) = 12 m² (129.17 ft²)
    2. Sheets: rows of sheets times sheets in a row, laps included 2 sheets × 1 sheet = 2 sheets

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes

    Mesh sheets by layout and by area

    Sheets of the example size laid with laps, beside the count from the area alone, for square slabs

    Sheets of the example size laid with laps, beside the count from the area alone, for square slabs
    Slab sizeSheets laid with lapsSheets by area, with lapsSheets by area, without laps
    3 m × 3 m 2 sheets1 sheet1 sheet
    4 m × 4 m 2 sheets2 sheets2 sheets
    5 m × 5 m 6 sheets3 sheets3 sheets
    6 m × 6 m 6 sheets4 sheets4 sheets

    Whole sheets are laid with a lap where they meet, so the layout can need more sheets than the area alone suggests. The sheet size and lap are examples.