Concrete Grades: RC20/25, RC25/30 and GEN Mixes

A grade such as C25 is a label for the strength of hardened concrete at a set age, not a figure the sums on this site use; the table shows the strength one UK supplier prints beside each of its classes.

Estimates for planning, not professional advice. Read the full notice.

Work it out for your own sizes

Work out the cubic metres to order

Example to try: Length 3 m (9 ft 10 1/8 in), Width 4 m (13 ft 1 1/2 in), Depth 100 mm (3 15/16 in)

Strength printed for each class

The strength at a set age that Heidelberg Materials UK, Blue Circle and Holcim print for their ready-mixed classes and bagged 40N concretes

The strength at a set age that Heidelberg Materials UK, Blue Circle and Holcim print for their ready-mixed classes and bagged 40N concretes
Class or productStrength at 28 days
RC20/25, ready-mixed 25 N/mm² (per Heidelberg Materials' product page, checked 12 Nov 2026)
RC25/30, ready-mixed 30 N/mm² (per Heidelberg Materials' product page, checked 12 Nov 2026)
FND2, ready-mixed 30 N/mm² (per Heidelberg Materials' product page, checked 12 Nov 2026)
PAV1, ready-mixed 35 N/mm² (per Heidelberg Materials' product page, checked 12 Nov 2026)
Blue Circle High Strength Concrete (40N), bagged 40 N/mm² (per Blue Circle's data sheet, checked 12 Nov 2026)
Holcim High Performance Concrete (40N), bagged 40 N/mm² (per Holcim's data sheet, checked 12 Nov 2026)

Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.

Sources: [1][2][3]

Each strength is the figure on the maker's own page or sheet. The ready-mixed classes come from a supplier's page; the last two rows are bagged concretes.

What the two numbers in a class mean

A class such as C28/35 carries two numbers. The supplier's page explains them:

The first of these numbers is the strength when a cylinder of hardened concrete is crushed after 28 days.

Heidelberg Materials UK, Types of concrete (ready-mixed concrete, technical information) (Web page, no date printed)[1]

The second is the strength when a cube of the concrete is tested at the same age.

Heidelberg Materials UK, Types of concrete (ready-mixed concrete, technical information) (Web page, no date printed)[1]

The supplier's page prints classes such as RC25/30 and RC20/25. A class written C25 or C20 on its own is not on that page, so no strength is quoted for it here.

What the supplier says each class is for

This type of concrete is suitable for mild exposure conditions. … Concrete strength: 30N/mm2 at 28 days

Heidelberg Materials UK, Types of concrete (ready-mixed concrete, technical information) (Web page, no date printed)[1]

FND2: Suitable for unreinforced foundations in DC-2 soils. … Concrete strength: 30N/mm2 at 28 days

Heidelberg Materials UK, Types of concrete (ready-mixed concrete, technical information) (Web page, no date printed)[1]

This is the most common type of concrete used for domestic pavement construction, where no de-icing salts are used. … Concrete strength: 35N/mm2 at 28 days

Heidelberg Materials UK, Types of concrete (ready-mixed concrete, technical information) (Web page, no date printed)[1]

GEN grades

The supplier describes GEN1 and GEN3 as follows.

GEN1 is an extremely versatile mix used throughout the construction industry for general and housing applications.

Heidelberg Materials UK, Types of concrete (ready-mixed concrete, technical information) (Web page, no date printed)[1]

Gen 3 is commonly used for light duty domestic applications and foundations.

Heidelberg Materials UK, Types of concrete (ready-mixed concrete, technical information) (Web page, no date printed)[1]

The supplier prints no strength beside either GEN grade, so none is shown in the table.

Bagged concrete sold by strength

Two bagged concretes are named for the strength their makers state. Their stated uses, in their own words:

suitable for concrete bases, drives, paths, garage floors, structural concrete, footings and foundations*, and for fixing security fences, traffic signs and bollards.

Tarmac Trading Limited (Blue Circle), High Strength Concrete (40N) Product Data Sheet (December 2023)[2]

APPLICATIONS Structural concrete Steps Paths Concrete bases (greenhouses and sheds) Internal or external application Repair and maintenance projects

Holcim UK, 40N High Performance Concrete technical data sheet (April 2025)[3]

A grade is part of the order, not of the sum

The ready mix calculator page works out cubic metres from the size of the job. The grade is not an input to it, and this page does not say which grade a job takes.

Questions

What is C25 concrete?

C25 is a strength class label. The supplier's page quoted here prints classes such as RC25/30 with a strength in N/mm², and no class named C25, so no strength is stated for it on this page.

What is GEN 1 concrete?

GEN1 is a general-purpose grade. The supplier's own description of it is quoted on this page, and it prints no strength beside it.

What is C20 concrete?

Like C25, it is a strength class label that the supplier's page does not print on its own. The table shows RC20/25 instead, with the strength printed beside it.

Calculate it for your project

Enter your own sizes to get the amount to buy or the layout figures, with the maths shown and a page to print.

Ready Mix Concrete Calculator

Sources (3)

  1. Types of concrete (ready-mixed concrete, technical information) (opens in new tab), Heidelberg Materials UK, Web page, no date printed. Manufacturer data.
    “The first of these numbers is the strength when a cylinder of hardened concrete is crushed after 28 days.”
    “The second is the strength when a cube of the concrete is tested at the same age.”
    “This type of concrete is suitable for mild exposure conditions. … Concrete strength: 30N/mm2 at 28 days”
    “FND2: Suitable for unreinforced foundations in DC-2 soils. … Concrete strength: 30N/mm2 at 28 days”
    “This is the most common type of concrete used for domestic pavement construction, where no de-icing salts are used. … Concrete strength: 35N/mm2 at 28 days”
    “GEN1 is an extremely versatile mix used throughout the construction industry for general and housing applications.”
    “Gen 3 is commonly used for light duty domestic applications and foundations.”
    “Concrete strength: 25N/mm2 at 28 days”
    Per Heidelberg Materials' product page, checked 12 Nov 2026. Figures and regulations change; verify with the source. Back to where this is used (Source 1)
  2. High Strength Concrete (40N) Product Data Sheet (opens in new tab), Tarmac Trading Limited (Blue Circle), December 2023. Manufacturer data.
    “suitable for concrete bases, drives, paths, garage floors, structural concrete, footings and foundations*, and for fixing security fences, traffic signs and bollards.”
    “When used correctly it will typically achieve a 28-day compressive strength of 40 N/mm2.”
    Per Blue Circle's data sheet, checked 12 Nov 2026. Figures and regulations change; verify with the source. Back to where this is used (Source 2)
  3. 40N High Performance Concrete technical data sheet (opens in new tab), Holcim UK, April 2025. Manufacturer data.
    “APPLICATIONS Structural concrete Steps Paths Concrete bases (greenhouses and sheds) Internal or external application Repair and maintenance projects”
    “40N strength after 28 days”
    Per Holcim's data sheet, checked 12 Nov 2026. Figures and regulations change; verify with the source. Back to where this is used (Source 3)

These are summaries of what the sources say, not professional advice. Rules and product data change. Check with your local building control office and the product label about your own project.