Concrete Foundation Calculator

Enter the length, width and depth of a foundation trench or the length, height and thickness of a wall and get the volume and the bags of concrete mix, with the working shown. Volume only: it does not size a foundation.

A ready-made setup of the Concrete Calculator.

Estimates for planning, not professional advice. Read the full notice.

Foundation or wall size

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 12 metres, 39 feet 4 and 7 sixteenths inches

A foundation's width, or a wall's height.

reads as 400 millimetres, 1 foot 3 and 3 quarters inches

A foundation's depth, or a wall's thickness.

reads as 200 millimetres, 7 and 7 eighths inches

Example: a footing run

106 20 kg (44.1 lb) bags

  • Concrete in the foundation 0.96 m³ (33.9 ft³)
  • To mix, with the allowance for waste 1.06 m³ (37.29 ft³)

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Concrete mix, 20 kg (44.1 lb) bag 106

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How many bags of concrete for a foundation trench?

    Enter the length of the run, the width and the depth. The table on this page gives the bags for a ten metre run at common widths and depths, and the calculator counts any length.

    How is the concrete for a wall worked out?

    A wall is its length times its height times its thickness. Put the height in the width field and the thickness in the depth field; the calculator adds the allowance for waste and rounds up once, at the bag.

    Does it size a foundation?

    No. It works out concrete volume only. What a foundation needs depends on the load and the ground, so ask your local building control office or a structural engineer.

    Worked example: a footing run

    Show the working
    1. Foundation volume 12 m (39 ft 4 7/16 in) × 400 mm (1 ft 3 3/4 in) × 200 mm (7 7/8 in) = 0.96 m³ (33.902 ft³)
    2. Add the allowance for waste once 0.96 m³ (33.902 ft³) + 10% = 1.06 m³ (37.29 ft³)
    3. Divide by the volume of one bag 1.06 m³ (37.29 ft³) ÷ 0.01 m³ (0.35 ft³, converted)[1] = 105.6 bags
    4. Round up once, to whole bags 105.6 bags = 106 × 20 kg (44.1 lb) bags

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Concrete allowance for waste 10%
    Default A typed allowance, not a source's figure: no hidden extra. Ten per cent is the starting example; ask your supplier.
    Volume of one bag of Blue Circle High Strength Concrete (40N) 20 kg 0.01 m³ (0.35 ft³, converted)[1]
    One 20 kg bag of Blue Circle High Strength Concrete (40N) typically makes around 0.01 m³ of fresh concrete.
    Volume of one bag of Blue Circle Multi-Purpose Concrete 20 kg 0.01 m³ (0.35 ft³, converted)[2]
    One 20 kg bag of Blue Circle Multi-Purpose Concrete typically makes around 0.01 m³ of fresh concrete.
    Volume of one bag of Holcim High Performance Concrete 20 kg approx. 0.01 m³ (0.35 ft³, converted)[3]
    One 20 kg bag of Holcim High Performance Concrete yields approximately 0.01 m³ of concrete.

    Bags for a ten metre run, by width and depth

    Bags of the first concrete mix in the list for a ten metre run of foundation, by width and depth, with the allowance for waste added

    Bags of the first concrete mix in the list for a ten metre run of foundation, by width and depth, with the allowance for waste added
    Foundation widthBags at 15 cm deepBags at 20 cm deepBags at 30 cm deep
    200 mm (7 7/8 in) 33 × 20 kg (44.1 lb) bags44 × 20 kg (44.1 lb) bags66 × 20 kg (44.1 lb) bags
    300 mm (11 13/16 in) 50 × 20 kg (44.1 lb) bags66 × 20 kg (44.1 lb) bags99 × 20 kg (44.1 lb) bags
    400 mm (1 ft 3 3/4 in) 66 × 20 kg (44.1 lb) bags88 × 20 kg (44.1 lb) bags132 × 20 kg (44.1 lb) bags
    500 mm (1 ft 7 11/16 in) 83 × 20 kg (44.1 lb) bags110 × 20 kg (44.1 lb) bags165 × 20 kg (44.1 lb) bags
    600 mm (1 ft 11 5/8 in) 99 × 20 kg (44.1 lb) bags132 × 20 kg (44.1 lb) bags198 × 20 kg (44.1 lb) bags

    Each count is rounded up once, to whole bags, after the allowance for waste is added. The yield of the bag is the maker's printed figure, shown in the assumptions. Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers.

    Sources (3)

    1. High Strength Concrete (40N) Product Data Sheet (opens in new tab), Tarmac Trading Limited (Blue Circle), December 2023. Manufacturer data.
      “One 20kg bag will typically produce around 0.01 m3 of fresh concrete (0.33m x 0.33m x 0.1m).”
      Per Blue Circle's data sheet, checked 12 Nov 2026. Figures and regulations change; verify with the source. Back to where this is used (Source 1)
    2. Multi-Purpose Concrete Product Data Sheet (opens in new tab), Tarmac Trading Limited (Blue Circle), December 2023. Manufacturer data.
      “One 20kg bag will typically produce around 0.01 m3 of fresh concrete (0.33m x 0.33m x 0.1m).”
      Per Blue Circle's data sheet, checked 12 Nov 2026. Figures and regulations change; verify with the source. Back to where this is used (Source 2)
    3. 40N High Performance Concrete technical data sheet (opens in new tab), Holcim UK, April 2025. Manufacturer data.
      “One 20kg bag will yield approximately 0.01m3 of concrete, sufficient cover approximately 0.2m2 at 50mm depth.”
      Per Holcim's data sheet, checked 12 Nov 2026. Figures and regulations change; verify with the source. Back to where this is used (Source 3)

    These are summaries of what the sources say, not professional advice. Rules and product data change. Check with your local building control office and the product label about your own project.