MOT Type 1 Calculator
HoneyDoMath.eu
Enter the size of the patio and the depth of the sub-base and the bedding sand and get the sub-base in tonnes and the sand in bags or tonnes, each rounded up once on its own.
A ready-made setup of the Paving Calculator.
Estimates for planning, not professional advice. Read the full notice.
The drawing did not open. Length and width are still here.
Patio: shape and size
Skip the drawingDrag a round corner to move it. The small hollow diamond on a side is its curve handle: drag it across the side to curve the side (it is not a corner). To add a corner (a new point), tap the side itself, then choose Add a point here. Tapping a corner or a side opens its actions. Drag empty space to move the view; pinch, or Ctrl and the mouse wheel, to zoom. The keys are listed under Keys.
Keys
- Tab
- next corner; each says how far it is from corner 1
- Arrow keys on a corner
- move it one square; ten with Shift; 1 mm with Alt
- Delete or Backspace
- remove the corner; its two sides join in one straight side
- + on a corner
- add a corner halfway along the next side
- Arrow keys on the drawing
- move the view; further with Shift
- + and - on the drawing
- zoom in and out
- 0 on the drawing
- show the whole shape
- Ctrl+Z (Cmd+Z on a Mac)
- undo, except inside a typed field (it keeps its own)
- Ctrl+Shift+Z or Ctrl+Y
- redo
- Escape while dragging
- put it back where it was
- Enter on a corner or side
- go to its actions
- Escape in the actions
- close them and go back to the drawing
The drawing did not load. Check your connection and try again.
- Area
- 12 m² (129.17 ft²)
- Perimeter
- 14 m (45 ft 11 3/16 in)
- Cut-out edges
No area until the shape is fixed.
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Shape: Rectangle Change
Sides
Corners
Cut-outs
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Example: a paved patio
3 t to order (2.9 t exact)
- Sub-base: loose volume, with its allowance 1.8 m³ (63.57 ft³)
- Sub-base, tonnes at the supplier's minimum order 3 t
- Bedding sand: loose volume, with its allowance 0.48 m³ (16.95 ft³)
- Bags of the size above 12 × 40 L (1.41 ft³) bags
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Sub-base by the tonne, 1 t 3 t
- Bedding sand by the bag, 40 L (1.41 ft³) bag 12
Questions
How much sub-base do I need under paving?
Enter the patio size and the sub-base depth. The calculator gives the compacted volume, the loose volume with your bulking allowance and the tonnes at the weight you enter.
How much bedding sand goes under paving?
Enter the bedding depth. The sand is a loose layer with no expansion, counted in whole bags of the size you choose or in tonnes at your weight.
Where do the depths and weights come from?
They are examples to replace. No depth, weight or bulking allowance is taken from a source, and the calculator does not judge the depth you type.
Worked example: a paved patio
Show the working
- Sub-base: volume in place 12 m² (129.17 ft²) × 150 mm (5 7/8 in) (0.15 m) = 1.8 m³ (63.57 ft³)
- Sub-base: loose volume, with its allowance 1.8 m³ (63.57 ft³) + 0 per cent allowance = 1.8 m³ (63.57 ft³)
- Sub-base: tonnes at the weight 1.8 m³ (63.57 ft³) × 1,600 kg/m³ (1.6 t/m³) = 2.9 t
- Sub-base: round up once, to the minimum tonnage 2.9 t = 3 t
- Bedding sand: loose volume, with its allowance 12 m² (129.17 ft²) × 40 mm (1 9/16 in) (0.04 m) = 0.48 m³ (16.951 ft³)
- Bags: divide by the bag size, round up once 0.48 m³ (16.951 ft³) ÷ 40 L = 12 × 40 L (1.41 ft³) bags
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Weight of the sub-base, example | 1,600 kg/m³ (1.6 t/m³, as published) | |
| Default An example to replace, not a figure from a source. Ask your supplier. | ||
| Weight of the bedding sand, example | 1,600 kg/m³ (1.6 t/m³, as published) | |
| Default An example to replace, not a figure from a source. Ask your supplier. | ||
| Waste allowance | 0% | |
| Default No hidden allowance. Check your label or supplier. | ||
| Sub-base bulking allowance, example | 0% | |
| Default The share added to the compacted depth to get the loose amount. It starts at nothing: enter your supplier's figure. | ||
| Supplier's minimum order in tonnes | 0.5 t | |
| Default Suppliers set a minimum order by weight. This figure is an example to replace. Ask your supplier. | ||
| Bag size in litres | 40 L | |
| Default The bag size is printed on the label. The sizes shown are examples, not figures from a source. Check your label. | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Sub-base and sand by patio size
Tonnes of sub-base and bags of bedding sand for five patio sizes at the starting depths
| Patio area | Sub-base, tonnes | Sand, bags |
|---|---|---|
| 9 m² (96.88 ft²) | 2.5 t | 9 bags |
| 12 m² (129.17 ft²) | 3 t | 12 bags |
| 16 m² (172.22 ft²) | 4 t | 16 bags |
| 20 m² (215.28 ft²) | 5 t | 20 bags |
| 30 m² (322.92 ft²) | 7.5 t | 30 bags |
Each row is worked out on its own. The sub-base is bulked up to loose material and the bedding sand is loose already.