Paving Calculator
HoneyDoMath.eu
Enter a paved patio's size and your paving slab or block size and joint, and get the slabs or blocks, with a border if you want one, rounded up once, with the working shown for an example patio. A patio that is not a rectangle can be drawn.
Estimates for planning, not professional advice. Read the full notice.
The drawing did not open. Length and width are still here.
Patio: shape and size
Skip the drawingDrag a round corner to move it. The small hollow diamond on a side is its curve handle: drag it across the side to curve the side (it is not a corner). To add a corner (a new point), tap the side itself, then choose Add a point here. Tapping a corner or a side opens its actions. Drag empty space to move the view; pinch, or Ctrl and the mouse wheel, to zoom. The keys are listed under Keys.
Keys
- Tab
- next corner; each says how far it is from corner 1
- Arrow keys on a corner
- move it one square; ten with Shift; 1 mm with Alt
- Delete or Backspace
- remove the corner; its two sides join in one straight side
- + on a corner
- add a corner halfway along the next side
- Arrow keys on the drawing
- move the view; further with Shift
- + and - on the drawing
- zoom in and out
- 0 on the drawing
- show the whole shape
- Ctrl+Z (Cmd+Z on a Mac)
- undo, except inside a typed field (it keeps its own)
- Ctrl+Shift+Z or Ctrl+Y
- redo
- Escape while dragging
- put it back where it was
- Enter on a corner or side
- go to its actions
- Escape in the actions
- close them and go back to the drawing
The drawing did not load. Check your connection and try again.
- Area
- 12 m² (129.17 ft²)
- Perimeter
- 14 m (45 ft 11 3/16 in)
- Cut-out edges
No area until the shape is fixed.
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Shape: Rectangle Change
Sides
Corners
Cut-outs
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Example: a patio
70 paving slabs
- Patio area 12 m² (129.17 ft²)
- Slabs, exact 66.67 slabs
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Paving slabs 70
Questions
How many paving slabs or blocks do I need?
Type the patio's size and the size of your slab or block, with a joint if you leave one. The calculator divides the area by one slab plus its joint and adds your waste allowance, rounded up once.
How are border slabs counted?
Choose the number of border rows and, if the border slab is a different size, type it. The band is the rows times the border slab's width on every side, and the field inside it is counted separately.
Worked example: a patio
Show the working
- Patio area: length times width 4 m (13 ft 1 1/2 in) × 3 m (9 ft 10 1/8 in) = 12 m² (129.17 ft²)
- Slabs: the area divided by one slab and its joint 12 m² (129.17 ft²) ÷ 0.18 m² (1.94 ft²) = 66.67 slabs
- Add the waste allowance and round up once 66.67 slabs × 1.05 = 70 paving slabs
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Waste allowance | 5% | |
| Default Your own allowance. No source is cited for it here; ask your supplier. | ||
| Slab or block length | 600 mm (1 ft 11 5/8 in, converted)[1] | |
| Marshalls' data sheet gives its Standard Pimple paving 600 × 300 × 63 mm at 5.6 per m², in packs of 16 covering 2.9 m². | ||
| Slab or block width | 300 mm (11 13/16 in, converted)[1] | |
| Marshalls' data sheet gives its Standard Pimple paving 600 × 300 × 63 mm at 5.6 per m², in packs of 16 covering 2.9 m². | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Field and border slabs for the example patio
The example patio with a border of smaller slabs: field slabs and border slabs to buy by the number of border rows
| Border rows | Border band width | Field slabs | Border slabs |
|---|---|---|---|
| No border | 0 mm (0 in) | 70 paving slabs | 0 paving slabs |
| One row | 150 mm (5 7/8 in) | 59 paving slabs | 47 paving slabs |
| Two rows | 300 mm (11 13/16 in) | 48 paving slabs | 90 paving slabs |
| Three rows | 450 mm (1 ft 5 11/16 in) | 38 paving slabs | 129 paving slabs |
A border of another slab size is its own line. The band is the rows times the border slab's width on every side, and the field is what is left inside it. The sizes are examples. Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers.
Sources (1)
-
Standard Pimple 600 x 300 x 63 datasheet (opens in new tab), Marshalls plc, Data sheet, no date printed.
Manufacturer data.
“Nominal Dimensions (mm) 600 x 300 x 63 ... 5.6 no per m2 ... Av. Pack Size m2 2.9 ... Units Per Pack 16”
Per Marshalls' data sheet, checked 14 Nov 2026. Figures and regulations change; verify with the source. Back to where this is used (Source 1)
These are summaries of what the sources say, not professional advice. Rules and product data change. Check with your local building control office and the product label about your own project.
Sources
- [1] Marshalls, Standard Pimple 600 x 300 x 63 datasheet. Checked 14 November 2026. https://media.marshalls.co.uk/image/upload/v1669373417/Standard_Pimple_600_x_300_x_63_Datasheet.pdf