Turf Calculator
HoneyDoMath.eu
Enter the length and width of your lawn and choose a roll size from your supplier, and get the turf rolls to order, rounded up once from the area with the waste allowance added once.
Estimates for planning, not professional advice. Read the full notice.
The drawing did not open. Length and width are still here.
Lawn: shape and size
Skip the drawingDrag a round corner to move it. The small hollow diamond on a side is its curve handle: drag it across the side to curve the side (it is not a corner). To add a corner (a new point), tap the side itself, then choose Add a point here. Tapping a corner or a side opens its actions. Drag empty space to move the view; pinch, or Ctrl and the mouse wheel, to zoom. The keys are listed under Keys.
Keys
- Tab
- next corner; each says how far it is from corner 1
- Arrow keys on a corner
- move it one square; ten with Shift; 1 mm with Alt
- Delete or Backspace
- remove the corner; its two sides join in one straight side
- + on a corner
- add a corner halfway along the next side
- Arrow keys on the drawing
- move the view; further with Shift
- + and - on the drawing
- zoom in and out
- 0 on the drawing
- show the whole shape
- Ctrl+Z (Cmd+Z on a Mac)
- undo, except inside a typed field (it keeps its own)
- Ctrl+Shift+Z or Ctrl+Y
- redo
- Escape while dragging
- put it back where it was
- Enter on a corner or side
- go to its actions
- Escape in the actions
- close them and go back to the drawing
The drawing did not load. Check your connection and try again.
- Area
- 30 m² (322.92 ft²)
- Perimeter
- 22 m (72 ft 2 1/8 in)
- Cut-out edges
No area until the shape is fixed.
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Shape: Rectangle Change
Sides
Corners
Cut-outs
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Example: a rectangular lawn
32 turf rolls
- Area to order, with the waste allowance 31.5 m² (339.06 ft²)
- Area of one roll 1 m² (10.76 ft²)
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Turf, by the roll, turf rolls 32
Questions
How many rolls of turf do I need?
Enter the lawn's length and width and pick the roll size from your supplier. The calculator adds the waste allowance to the area once, divides by the area of one roll and rounds up to whole rolls.
How big is a roll of turf?
Roll sizes differ between suppliers, so the size is a choice here, not a fixed figure. Ask your supplier for the size and pick the nearest one.
Is a waste allowance added?
Yes, once, to the area before the rolls are counted. It starts at a value you can change in the assumptions, and your supplier can say what they allow.
Worked example: a rectangular lawn
Show the working
- Area of the lawn 6 m (19 ft 8 1/4 in) × 5 m (16 ft 4 7/8 in) = 30 m² (322.92 ft²)
- Area to order: the lawn plus the waste allowance, added once 30 m² (322.92 ft²) × 1.05 = 31.5 m² (339.06 ft²)
- Area of one roll from its two sides 2 m (6 ft 6 3/4 in) × 500 mm (1 ft 7 11/16 in) = 1 m² (10.76 ft²)
- Rolls: the area to order over one roll, rounded up once 31.5 m² (339.06 ft²) ÷ 1 m² (10.76 ft²) = 32 turf rolls
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Waste allowance (%) | 5% | |
| Default Ask your turf supplier. Cuts and edges use some of every order. | ||
| Rolawn Medallion turf, area one roll covers, per the maker (approximately) | approx. 1 m² (10.76 ft², converted)[1] | |
| Rolawn’s specification sheet says each roll of Medallion turf covers approximately 1 m² and is typically 610 mm wide by 1640 mm long when harvested. | ||
| Rolawn Medallion turf, roll width when harvested, per the maker | 610 mm (2 ft, converted)[1] | |
| Rolawn’s specification sheet says each roll of Medallion turf covers approximately 1 m² and is typically 610 mm wide by 1640 mm long when harvested. | ||
| Rolawn Medallion turf, roll length when harvested, per the maker | 1,640 mm (5 ft 4 9/16 in, converted)[1] | |
| Rolawn’s specification sheet says each roll of Medallion turf covers approximately 1 m² and is typically 610 mm wide by 1640 mm long when harvested. | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Rolls by lawn size
Rolls of the starting size for four lawn sizes, with the starting waste allowance
| Lawn | Area to order | Rolls |
|---|---|---|
| 10 m² | 10.5 m² (113 ft²) | 11 turf rolls |
| 25 m² | 26.3 m² (282.6 ft²) | 27 turf rolls |
| 50 m² | 52.5 m² (565.1 ft²) | 53 turf rolls |
| 100 m² | 105 m² (1,130.2 ft²) | 105 turf rolls |
Each row is worked out on its own from the area to order. The roll size is a starting example; yours comes from your supplier.
What Rolawn prints for a roll of Medallion turf
Rows: 3
Roll area and size as printed on the maker's specification sheet
| Figure | Medallion turf |
|---|---|
| Area one roll covers, approximately | approx. 1 m² (10.76 ft², converted) |
| Roll width when harvested | 610 mm (2 ft, converted) |
| Roll length when harvested | 1,640 mm (5 ft 4 9/16 in, converted) |
Figures in the Medallion turf column are per Rolawn's specification, checked 13 Nov 2026.
Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.
Source: [1]
The Rolawn Medallion roll is one of the choices in the roll size list; the other two sizes in it are examples, so choose the one your supplier sells. Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers.
Sources (1)
-
Rolawn Medallion Turf specification sheet (opens in new tab), Rolawn Limited, December 2023.
Manufacturer data.
“Each roll covers approximately 1m². Typical roll dimensions when harvested: 610mm (width) x 1640mm (length).”
Per Rolawn's specification, checked 13 Nov 2026. Figures and regulations change; verify with the source. Back to where this is used (Source 1)
These are summaries of what the sources say, not professional advice. Rules and product data change. Check with your local building control office and the product label about your own project.
Sources
- [1] Rolawn, Rolawn Medallion Turf specification sheet. Checked 13 November 2026. https://www.rolawn.co.uk/wp-content/uploads/2023/12/Rolawn_MedallionTurf_SpecSheet_Dec23.pdf