Mitre Angle Calculator
HoneyDoMath.eu
Choose the number of corners of a frame to count the mitre cuts, two for each corner. The saw settings for flat trim, coving and a regular polygon are worked out in the example and table.
Estimates for planning, not professional advice. Read the full notice.
Example: a square frame and an eight-sided one
8 mitre cuts
- Flat trim, each piece cut at 45 degrees
- Coving on the flat, mitre angle 31.62 degrees
- Coving on the flat, bevel angle 33.86 degrees
- Regular polygon, corner 135 degrees
- Regular polygon, each piece cut at 22.5 degrees
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
Saw settings
Type your angles in degrees. A box left empty is skipped.
The angle between the two walls, measured inside the corner.
The angle of the coving's back against the wall, from the moulding's packaging.
A whole number of sides, from three.
- Mitre cuts to make, mitre cuts 8
Questions
How do I find the mitre angle for a corner?
Measure the angle between the two walls, take it from a straight line and halve what is left. A square corner gives a flat trim mitre of half a right angle. The table lists settings for common corners.
What is the spring angle of coving?
It is the angle between the back of the coving and the wall. It is printed on the packaging, and the table uses two example spring angles; yours is the one on your moulding.
Worked example: a square frame and an eight-sided one
Show the working
- What is left of a straight line at the corner 180 degrees − 90 degrees = 90 degrees
- Each flat piece is cut at half of that 90 degrees ÷ 2 = 45 degrees
- Cuts: two for each corner 4 corners × 2 cuts = 8 mitre cuts
- A regular polygon's corner: the sides less two, over the sides, times a straight line 6 ÷ 8 sides × 180 degrees = 135 degrees
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Saw settings by corner angle
Flat trim mitre and coving-on-the-flat mitre and bevel for corners from eighty to one hundred and fifty degrees, at two spring angles
| Corner | Flat trim | Coving 38: mitre | Coving 38: bevel | Coving 45: mitre | Coving 45: bevel |
|---|---|---|---|---|---|
| 80° | 50 degrees | 36.27 degrees | 37.13 degrees | 40.12 degrees | 32.8 degrees |
| 90° | 45 degrees | 31.62 degrees | 33.86 degrees | 35.26 degrees | 30 degrees |
| 100° | 40 degrees | 27.32 degrees | 30.43 degrees | 30.68 degrees | 27.03 degrees |
| 110° | 35 degrees | 23.32 degrees | 26.87 degrees | 26.34 degrees | 23.93 degrees |
| 120° | 30 degrees | 19.57 degrees | 23.2 degrees | 22.21 degrees | 20.7 degrees |
| 130° | 25 degrees | 16.02 degrees | 19.45 degrees | 18.25 degrees | 17.39 degrees |
| 140° | 20 degrees | 12.63 degrees | 15.64 degrees | 14.43 degrees | 14 degrees |
| 150° | 15 degrees | 9.37 degrees | 11.77 degrees | 10.73 degrees | 10.55 degrees |
The two spring angles are examples; yours is on the moulding's packaging. Coving settings are for coving laid flat on the saw table.