Retaining Wall Calculator
HoneyDoMath.eu
Enter a wall's length and height and the size of your block and coping stone, and get the blocks by whole courses and the coping stones along the top, rounded up once, with the working shown for an example wall. It counts blocks and coping stones only.
Estimates for planning, not professional advice. Read the full notice.
Example: a garden retaining wall
74 blocks
- Courses of block under the coping 5 courses
- Laid height of the blocks 1.075 m (3 ft 6 5/16 in)
- Blocks if the cut pieces were all reused, exact 68.18 blocks
- Whole blocks per course times courses (the count used for the order) 70 blocks
- Coping stones to buy 16 copings
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Retaining wall blocks 74
- Coping stones 16
Questions
How many retaining wall blocks do I need?
Type the wall's length and height and the size of your block. The calculator counts the courses up to the coping, the whole blocks across the wall for those courses and the coping stones along the top, each rounded up once with your waste allowance.
Does it size the wall or its footing?
No. It counts blocks and coping stones from the sizes you type. How high a wall may be built, its drainage and its foundation are for an engineer or your local authority, not this calculator.
Worked example: a garden retaining wall
Show the working
- Height under the coping: wall height less the coping height 1 m (3 ft 3 3/8 in) − 50 mm (1 15/16 in) = 950 mm (3 ft 1 3/8 in)
- Courses: that height divided by one block's height 950 mm (3 ft 1 3/8 in) ÷ 215 mm (8 7/16 in) = 4.42 courses
- A course is a whole row, so round up 4.42 courses = 5 courses
- Whole blocks in one course: wall length over one block's length, rounded up 6 m (19 ft 8 1/4 in) ÷ 440 mm (1 ft 5 5/16 in) = 14 blocks
- Whole blocks: courses times blocks in one course 5 courses × 14 blocks = 70 blocks
- Add the waste allowance and round up once 70 blocks × 1.05 = 74 blocks
- Coping stones: whole coping stones along the wall, with waste, rounded up once 15 coping stones × 1.05 = 16 copings
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Waste allowance | 5% | |
| Default Your own allowance. No source is cited for it here; ask your supplier. | ||
| Block length | 440 mm (1 ft 5 5/16 in, converted)[1] | |
| Tarmac's page gives the Toplite Standard block face as 440 × 215 mm (length × height), 100 mm thick; it prints no pieces per m². | ||
| Block height | 215 mm (8 7/16 in, converted)[1] | |
| Tarmac's page gives the Toplite Standard block face as 440 × 215 mm (length × height), 100 mm thick; it prints no pieces per m². | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Courses and laid height against the wall height
Whole courses, laid height, blocks and coping stones for the example wall at several wall heights
| Wall height | Courses | Laid height of the blocks | Whole blocks per course | Blocks to buy | Coping stones to buy |
|---|---|---|---|---|---|
| 1 m | 5 courses | 1.075 m (3 ft 6 5/16 in) | 14 blocks | 74 blocks | 16 copings |
| 1.5 m | 7 courses | 1.505 m (4 ft 11 1/4 in) | 14 blocks | 103 blocks | 16 copings |
| 2 m | 10 courses | 2.15 m (7 ft 5/8 in) | 14 blocks | 147 blocks | 16 copings |
| 2.4 m | 11 courses | 2.365 m (7 ft 9 1/8 in) | 14 blocks | 162 blocks | 16 copings |
| 3 m | 14 courses | 3.01 m (9 ft 10 1/2 in) | 14 blocks | 206 blocks | 16 copings |
A course is a whole row, so the laid height can differ from the height typed. The block and coping sizes and the waste allowance are examples.
Sources (1)
-
Toplite Standard (opens in new tab), Tarmac, Web page, no date printed.
Manufacturer data.
“Face sizes, mm (length x height) | 440 x 215”
“Block Thickness (mm) | 100”
Per Tarmac's product page, checked 14 Nov 2026. Figures and regulations change; verify with the source. Back to where this is used (Source 1)
These are summaries of what the sources say, not professional advice. Rules and product data change. Check with your local building control office and the product label about your own project.
Sources
- [1] Tarmac, Toplite Standard. Checked 14 November 2026. https://www.tarmac.com/products/blocks/toplite-standard/