Roofing Felt Calculator

Enter the roof footprint and pitch in degrees and the width, length and laps of your roll, and get the rolls of roofing felt or underlay for the whole roof, with waste added once and rounded up once. The laps are numbers you enter.

Estimates for planning, not professional advice. Read the full notice.

Roof and roll

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 10 metres, 32 feet 9 and 11 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 8 metres, 26 feet 2 and 15 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 1 metre, 3 feet 3 and 3 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 50 metres, 164 feet 1 half of an inch

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 100 millimetres, 3 and 15 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 150 millimetres, 5 and 7 eighths inches

Example: a gable roof under felt

3 rolls of roofing felt

  • Roof area 92.38 m² (994.33 ft²)
  • Area one roll covers after the laps 44.87 m² (482.92 ft²)

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Roofing felt rolls, 1 m by 50 m 3

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How many rolls of roofing felt do I need?

    The roof area is the footprint times the pitch multiplier. Each roll covers its width less the side lap times its length less the end lap. The area plus waste divided by that, rounded up once, gives the number of rolls.

    Where do the laps come from?

    Your roll's label or your supplier. The calculator uses the laps you type and shows the area one roll covers after them.

    Worked example: a gable roof under felt

    Show the working
    1. Footprint: length times width 10 m (32 ft 9 11/16 in) × 8 m (26 ft 2 15/16 in) = 80 m² (861.11 ft²)
    2. Roof area: footprint times the pitch multiplier 80 m² (861.11 ft²) × 1.1547 = 92.38 m² (994.33 ft²)
    3. One roll after the laps: width less the side lap, times length less the end lap 900 mm (2 ft 11 7/16 in) × 49.85 m (163 ft 6 5/8 in) = 44.87 m² (482.92 ft²)
    4. Rolls: roof area plus waste, over what one roll covers, rounded up once 92.38 m² (994.33 ft²) + 10% waste ÷ 44.87 m² (482.92 ft²) = 3 rolls of roofing felt

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance 10%
    Default Your own allowance, added once to the total. Check your label or supplier.