Pea Shingle Calculator

Enter the length, width and depth and get the pea shingle to order in cubic metres, rounded up once to the supplier's minimum order, with the working shown for an example. Tonnes need the weight your supplier gives.

A ready-made setup of the Gravel Calculator.

Estimates for planning, not professional advice. Read the full notice.

Area size

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3 metres, 9 feet 10 and 1 eighth inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 2 metres, 6 feet 6 and 3 quarters inches

Enter the depth in millimetres, or type a unit.

reads as 50 millimetres, 1 and 15 sixteenths inches

Ask your supplier for the weight per cubic metre. Check your label or supplier.

Example: an area of pea shingle

0.5 m³ (0.65 yd³) to order (0.3 m³ exact)

  • Volume in the area 0.3 m³ (10.59 ft³)
  • Cubic metres to order 0.3 m³ (10.59 ft³)
  • Cubic metres at the supplier's minimum order 0.5 m³ (17.66 ft³)
  • Bags of the size above 8 × 40 L (1.41 ft³) bags
  • Pea shingle by the cubic metre, 1 m³ (1.31 yd³) 0.5 m³ (0.65 yd³)

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How much pea shingle do I need?

    Enter the length, width and depth. The calculator multiplies them for the volume, adds the waste allowance once and rounds up once, to the supplier's minimum order in cubic metres.

    Why does the calculator not give tonnes straight away?

    No weight is filled in, because none is taken from a source. Enter the weight per cubic metre your supplier gives, choose tonnes, and the order is worked out from it.

    Is anything added for waste?

    No hidden allowance: waste starts at nothing, it is a row you can change, and it is added once.

    Worked example: an area of pea shingle

    Show the working
    1. Area 3 m (9 ft 10 1/8 in) × 2 m (6 ft 6 3/4 in) = 6 m² (64.58 ft²)
    2. Volume at the depth 6 m² (64.58 ft²) × 50 mm (1 15/16 in) (0.05 m) = 0.3 m³ (10.594 ft³)
    3. Add the waste allowance, once 0.3 m³ (10.594 ft³) + 0 per cent waste = 0.3 m³ (10.59 ft³)
    4. Round up once, to the supplier's minimum order 0.3 m³ (10.59 ft³) = 0.5 m³ (17.66 ft³)
    5. Bags: divide by the bag size, round up once 0.3 m³ (10.594 ft³) ÷ 40 L = 8 × 40 L (1.41 ft³) bags

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance 0%
    Default No hidden allowance. Check your label or supplier.
    Supplier's minimum order in cubic metres 0.25 m³ (8.83 ft³, converted)
    Default Suppliers set a minimum order for loose material. This figure is an example to replace. Ask your supplier.
    Supplier's minimum order in tonnes 0.5 t
    Default Suppliers set a minimum order by weight. This figure is an example to replace. Ask your supplier.
    Bag size in litres 40 L
    Default The bag size is printed on the label. The sizes shown are examples, not figures from a source. Check your label.

    Pea shingle by depth

    Cubic metres of pea shingle for the area of the example at four depths, with no waste allowance

    Cubic metres of pea shingle for the area of the example at four depths, with no waste allowance
    DepthCubic metresCubic metres at the supplier's minimum orderBags of the size above
    20 mm (13/16 in) 0.12 m³ (4.24 ft³)0.25 m³ (8.83 ft³)3 bags
    50 mm (1 15/16 in) 0.3 m³ (10.59 ft³)0.5 m³ (17.66 ft³)8 bags
    100 mm (3 15/16 in) 0.6 m³ (21.19 ft³)0.75 m³ (26.49 ft³)15 bags
    150 mm (5 7/8 in) 0.9 m³ (31.78 ft³)1 m³ (35.31 ft³)23 bags

    Each depth is worked out on its own, with the minimum order in the assumptions.