Decorative Stone Calculator
HoneyDoMath.eu
Enter the length, width and depth and get the decorative stone to order in cubic metres, rounded up once to the supplier's minimum order, with the working shown for an example. Tonnes need the weight your supplier gives.
A ready-made setup of the Gravel Calculator.
Estimates for planning, not professional advice. Read the full notice.
The drawing did not open. Length and width are still here.
Bed: shape and size
Skip the drawingDrag a round corner to move it. The small hollow diamond on a side is its curve handle: drag it across the side to curve the side (it is not a corner). To add a corner (a new point), tap the side itself, then choose Add a point here. Tapping a corner or a side opens its actions. Drag empty space to move the view; pinch, or Ctrl and the mouse wheel, to zoom. The keys are listed under Keys.
Keys
- Tab
- next corner; each says how far it is from corner 1
- Arrow keys on a corner
- move it one square; ten with Shift; 1 mm with Alt
- Delete or Backspace
- remove the corner; its two sides join in one straight side
- + on a corner
- add a corner halfway along the next side
- Arrow keys on the drawing
- move the view; further with Shift
- + and - on the drawing
- zoom in and out
- 0 on the drawing
- show the whole shape
- Ctrl+Z (Cmd+Z on a Mac)
- undo, except inside a typed field (it keeps its own)
- Ctrl+Shift+Z or Ctrl+Y
- redo
- Escape while dragging
- put it back where it was
- Enter on a corner or side
- go to its actions
- Escape in the actions
- close them and go back to the drawing
The drawing did not load. Check your connection and try again.
- Area
- 8 m² (86.11 ft²)
- Perimeter
- 12 m (39 ft 4 7/16 in)
- Cut-out edges
No area until the shape is fixed.
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Shape: Rectangle Change
Sides
Corners
Cut-outs
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Example: a bed of decorative stone
0.75 m³ (0.98 yd³) to order (0.64 m³ exact)
- Volume in the area 0.64 m³ (22.6 ft³)
- Cubic metres to order 0.64 m³ (22.6 ft³)
- Cubic metres at the supplier's minimum order 0.75 m³ (26.49 ft³)
- Bags of the size above 16 × 40 L (1.41 ft³) bags
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Decorative stone by the cubic metre, 1 m³ (1.31 yd³) 0.75 m³ (0.98 yd³)
Questions
How much decorative stone do I need?
Enter the length, width and depth. The calculator multiplies them for the volume, adds the waste allowance once and rounds up once, to the supplier's minimum order in cubic metres.
Why does the calculator not give tonnes straight away?
No weight is filled in, because none is taken from a source. Enter the weight per cubic metre your supplier gives, choose tonnes, and the order is worked out from it.
Is anything added for waste?
No hidden allowance: waste starts at nothing, it is a row you can change, and it is added once.
Worked example: a bed of decorative stone
Show the working
- Area 4 m (13 ft 1 1/2 in) × 2 m (6 ft 6 3/4 in) = 8 m² (86.11 ft²)
- Volume at the depth 8 m² (86.11 ft²) × 80 mm (3 1/8 in) (0.08 m) = 0.64 m³ (22.601 ft³)
- Add the waste allowance, once 0.64 m³ (22.601 ft³) + 0 per cent waste = 0.64 m³ (22.6 ft³)
- Round up once, to the supplier's minimum order 0.64 m³ (22.6 ft³) = 0.75 m³ (26.49 ft³)
- Bags: divide by the bag size, round up once 0.64 m³ (22.601 ft³) ÷ 40 L = 16 × 40 L (1.41 ft³) bags
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Waste allowance | 0% | |
| Default No hidden allowance. Check your label or supplier. | ||
| Supplier's minimum order in cubic metres | 0.25 m³ (8.83 ft³, converted) | |
| Default Suppliers set a minimum order for loose material. This figure is an example to replace. Ask your supplier. | ||
| Supplier's minimum order in tonnes | 0.5 t | |
| Default Suppliers set a minimum order by weight. This figure is an example to replace. Ask your supplier. | ||
| Bag size in litres | 40 L | |
| Default The bag size is printed on the label. The sizes shown are examples, not figures from a source. Check your label. | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Decorative stone by depth
Cubic metres of decorative stone for the area of the example at four depths, with no waste allowance
| Depth | Cubic metres | Cubic metres at the supplier's minimum order | Bags of the size above |
|---|---|---|---|
| 20 mm (13/16 in) | 0.16 m³ (5.65 ft³) | 0.25 m³ (8.83 ft³) | 4 bags |
| 50 mm (1 15/16 in) | 0.4 m³ (14.13 ft³) | 0.5 m³ (17.66 ft³) | 10 bags |
| 100 mm (3 15/16 in) | 0.8 m³ (28.25 ft³) | 1 m³ (35.31 ft³) | 20 bags |
| 150 mm (5 7/8 in) | 1.2 m³ (42.38 ft³) | 1.25 m³ (44.14 ft³) | 30 bags |
Each depth is worked out on its own, with the minimum order in the assumptions.