Kitchen Splashback Tile Calculator
HoneyDoMath.eu
Enter the length and height of the wall strip, any window, hood or socket cut-outs, and the tile dimensions and grout joint, and get the whole tiles and boxes to buy, with a waste allowance you can change.
A ready-made setup of the Tile Calculator.
Estimates for planning, not professional advice. Read the full notice.
Example: a kitchen splashback
4 boxes of tiles
- Area to tile 1.8 m² (19.38 ft²)
- Tiles to cover the area 153.79 tiles
- Tiles with the waste allowance 170 tiles
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Tiles (boxes) 4
Questions
Do sockets and windows come off the tile count?
Yes, if you give their sizes. Fill in a cut-out's width and height and pick the number of socket cut-outs, and that area comes off the strip before the tiles are counted. A cut-out larger than the strip is not accepted.
Does the joint matter for small tiles?
More than for large ones. Each small tile takes its own size plus the joint, so even a narrow joint changes the count noticeably. The calculator uses the joint you type.
Worked example: a kitchen splashback
Show the working
- Strip area: length times height 3 m (9 ft 10 1/8 in) × 600 mm (1 ft 11 5/8 in) = 1.8 m² (19.38 ft²)
- Area one tile takes, joint included 152 mm (6 in) × 77 mm (3 1/16 in) = 0.0117 m² (0.126 ft²)
- Tiles to cover the area 1.8 m² (19.38 ft²) ÷ 0.0117 m² (0.126 ft²) = 153.79 tiles
- Add the waste allowance once, then round up once to whole tiles 153.79 tiles × 1.1 = 170 tiles
- Boxes: divide by the tiles in a box, round up once 170 tiles ÷ 44 = 4 boxes of tiles
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Tile waste allowance | 10% | |
| Default A typical allowance, not a figure from a standard. Change it to the allowance you want; check your tile label or supplier. | ||
| Grout joint width | 2 mm (1/16 in, converted) | |
| Default Your own joint width: check the spacing on your tile label or with your supplier. | ||
| Tiles per box | 44 tiles | |
| Default The tiles per box are on your tile label or your supplier's sheet; the list offers common counts. | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm