Grout Calculator

Enter the area, the tile size and thickness, the joint width and the density of your grout, and get the kilograms of grout and the bags to buy, rounded up once. The density and the bag sizes are examples you replace from your own label.

Estimates for planning, not professional advice. Read the full notice.

Area, tile and joint

Like 11 m²

reads as 20 square metres, 215.28 square feet

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 600 millimetres, 1 foot 11 and 5 eighths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 300 millimetres, 11 and 13 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 9 millimetres, 3 eighths of an inch

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 3 millimetres, 1 eighth of an inch

Like 2,300 kg/m³

reads as 1,600 kilograms per cubic metre, 99.88 pounds per cubic foot

Example: a tiled floor

1 5 kg (11 lb) bag

  • Grout for each square metre 0.2 kg (0.48 lb)
  • Grout for the area 4.3 kg (9.52 lb)

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Grout, 5 kg bag, 5 kg (11 lb) bag 1

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How is the grout worked out?

    The joints are a slot as deep as the tile and as wide as the joint. The calculator takes the length of joint in each square metre from the tile's two sides, multiplies by the thickness, the joint width and the grout's density, and rounds the bags up once.

    Where do I find the density?

    Look on the grout's label or data sheet, where the density may be printed in kilograms per cubic metre. The value on this page is an example, not a maker's number, so replace it with the one on your own pack.

    Worked example: a tiled floor

    Show the working
    1. Joint length for each square metre: the tile's two sides over its area 900 mm (2 ft 11 7/16 in) (0.9 m) ÷ 0.18 m² (1.94 ft²) = 5 m of joint per m²
    2. Grout for each square metre: joint length times thickness times joint width times density 5 m of joint per m² × 9 mm (3/8 in) × 3 mm (1/8 in) × 1,600 kg/m³ = 0.216 kg (0.476 lb)
    3. Grout for the whole area 20 m² (215.28 ft²) ÷ 1 m² (10.76 ft²) × 0.216 kg (0.476 lb) = 4.3 kg (9.52 lb)
    4. Bags: divide by the bag and round up once 4.3 kg (9.52 lb) ÷ 5 kg (11.02 lb) = 1 × 5 kg (11 lb) bag

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Extra grout on top 0%
    Default Our assumption: none. Add a percentage if you want an extra allowance; check your label or supplier.
    Bag size 5 kg (11 lb, converted)[1]
    Mapei's UK data sheet lists Ultracolor Plus in 23 kg bags and in boxes of 4 x 5 kg or 9 x 1 kg, depending on colour.
    Density of the grout (example) 1,600 kg/m³
    Default An example value, not a maker's figure. Replace it with the value on your grout's label or data sheet.
    Tile thickness (example) 9 mm (3/8 in, converted)
    Default An example value; the joint is filled to the full depth of the tile. Replace it with the thickness of your own tiles.

    Sources (1)

    1. Ultracolor Plus technical data sheet (opens in new tab), Mapei UK, Data sheet, no date printed. Manufacturer data.
      “PACKAGING 23 kg bags, and 4x5 kg or 9x1 kg boxes dependent on the colour.”
      “Bulk density (kg/m3): 1,400 ... Density of mix (kg/m3): 1,980”
      Per Mapei's data sheet, checked 14 Nov 2026. Figures and regulations change; verify with the source. Back to where this is used (Source 1)

    These are summaries of what the sources say, not professional advice. Rules and product data change. Check with your local building control office and the product label about your own project.