Even Spacing Calculator
HoneyDoMath.eu
Enter the length of a run and the width of each item, and choose a set number of items or a largest gap. The count of items placed is the live result; the equal gap, the centre-to-centre distance and every mark from the start of the run are worked out in the example and tables.
Estimates for planning, not professional advice. Read the full notice.
Example: five shelf brackets on a rail
5 items
- Gap between items and at the ends 0.225 m (0.738 ft)
- Centre to centre 0.315 m (1.033 ft)
- First item, left edge 0.225 m (0.738 ft)
- First item, centre 0.27 m (0.886 ft)
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
Gaps and marks
These numbers follow the sizes above for every item in the list. Every mark is measured from the start of the run.
- Items to place, items placed 5
Questions
What is the difference between a gap at the ends and flush ends?
With a gap at both ends the first and last items sit one gap in from the run's ends. Flush to both ends puts them against the ends, and flush at the start only puts the first against the start. The first table shows all three for one job.
How do I space shelves or coat hooks evenly?
Take the widths of the items off the length of the run and share what is left between the gaps. The example shows the working and the second table lists each mark from the start of the run.
Worked example: five shelf brackets on a rail
Show the working
- Width the items take 5 items × 90 mm (3 9/16 in) = 0.45 m (1.476 ft)
- Run left for gaps 1.8 m (5 ft 10 7/8 in) − 0.45 m (1.476 ft) = 1.35 m (4.429 ft)
- Gap: one more gap than items, so the run ends in a gap 1.35 m (4.429 ft) ÷ 6 gaps = 0.225 m (0.738 ft)
- First centre: the gap plus half an item 0.225 m (0.738 ft) + 0.045 m (0.148 ft) = 0.27 m (0.886 ft)
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
The same job under the three end rules
Gap, first centre and centre-to-centre distance for the example run under each end rule
| End rule | Gap | First centre | Centre to centre |
|---|---|---|---|
| Gaps at both ends | 0.225 m (0.738 ft) | 0.27 m (0.886 ft) | 0.315 m (1.033 ft) |
| Flush to both ends | 0.338 m (1.107 ft) | 0.045 m (0.148 ft) | 0.427 m (1.403 ft) |
| Flush at the start only | 0.27 m (0.886 ft) | 0.045 m (0.148 ft) | 0.36 m (1.181 ft) |
Only the end rule changes. A gap at both ends has one more gap than items; flush to both ends has one fewer; flush at the start only has the same number.
Marks for the example run
Left edge, centre and right edge of each item, measured from the start of the example run
| Item | Left edge | Centre | Right edge |
|---|---|---|---|
| Item 1 | 0.225 m (0.738 ft) | 0.27 m (0.886 ft) | 0.315 m (1.033 ft) |
| Item 2 | 0.54 m (1.772 ft) | 0.585 m (1.919 ft) | 0.63 m (2.067 ft) |
| Item 3 | 0.855 m (2.805 ft) | 0.9 m (2.953 ft) | 0.945 m (3.1 ft) |
| Item 4 | 1.17 m (3.839 ft) | 1.215 m (3.986 ft) | 1.26 m (4.134 ft) |
| Item 5 | 1.485 m (4.872 ft) | 1.53 m (5.02 ft) | 1.575 m (5.167 ft) |
Every mark is measured from the start of the run, never from the mark before it, so an error does not carry through.