Fibre Cement Cladding Calculator
HoneyDoMath.eu
Enter the house size, the gable ends and every opening, and get fibre cement boards by the cover width and the board length you enter, with trim and corner pieces. The working is shown for an example.
A ready-made setup of the Cladding Calculator.
Estimates for planning, not professional advice. Read the full notice.
Example: a house in fibre cement boards
177 fibre cement boards
- Net wall area 92.35 m² (994.05 ft²)
- Opening trim pieces 9 opening trim pieces
- Corner profiles 4 corner profiles
- Starter profile pieces 14 starter profiles
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
- Fibre cement boards 177
- Opening trim pieces 9
- Corner profiles 4
- Starter profile pieces 14
Questions
How many fibre cement boards cover a wall?
The net wall area with waste added once, divided by the area one board covers: its length times its cover width. Change the cover width and the count changes; use the figure from your own boards.
Why is the cover width a number I enter?
Boards of different makers and ranges show different amounts. The calculator counts what you give it and does not assume a maker's figure.
Worked example: a house in fibre cement boards
Show the working
- Gross wall: the distance round the house times the wall height 40 m (131 ft 2 13/16 in) × 2.5 m (8 ft 2 7/16 in) = 100 m² (1,076.39 ft²)
- Openings: every door and window at its own size 7.65 m² (82.34 ft²) = 7.65 m² (82.34 ft²)
- Net wall: gross wall less the openings 100 m² (1,076.39 ft²) − 7.65 m² (82.34 ft²) = 92.35 m² (994.05 ft²)
- Add the waste allowance, once, to the net wall 92.35 m² (994.05 ft²) + 10% waste = 101.59 m² (1,093.45 ft²)
- Divide by the area one piece covers: its length times the cover width 101.59 m² (1,093.45 ft²) ÷ 0.58 m² (6.2 ft²) = 176.36 pieces
- Round up once, to whole pieces 176.36 pieces = 177 fibre cement boards
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Waste allowance | 10% | |
| Default Your own allowance, added once to the total. Check your label or supplier. | ||
| Board length (use your own) | 3,600 mm (11 ft 9 3/4 in, converted)[1] | |
| Cedral's fixing guide gives its Lap plank as 3600 mm long with a 160 mm cover width, at 1.74 planks per m². | ||
| Cover width of one course (use your own) | 160 mm (6 5/16 in, converted)[1] | |
| Cedral's fixing guide gives its Lap plank as 3600 mm long with a 160 mm cover width, at 1.74 planks per m². | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
Sources (1)
-
Cedral facades fixing guide, February 2026 (opens in new tab), Cedral, February 2026.
Manufacturer data.
“3600mm”
“1.74* ... * Undulating planks 2.14 per m2, flat method 1.47 per m2 If the cover width of Cedral Lap is decreased to 150mm, 1.86 per m2 ... Approx. installed weight based on 30mm overlap, cover width of 160mm per plank”
Per Cedral's published data, checked 14 Nov 2026. Figures and regulations change; verify with the source. Back to where this is used (Source 1)
These are summaries of what the sources say, not professional advice. Rules and product data change. Check with your local building control office and the product label about your own project.
Sources
- [1] Cedral, Cedral facades fixing guide, February 2026. Checked 14 November 2026. https://media.cedral.world/doc_215350_gb/original/-1650659172/cedral-facades-fixing-guide-feb-2026.pdf?brand=cedral&market=gb