Stud Wall Calculator

Enter the length and height of a wall, the stud spacing, the plate layers and how many corners and openings it has, and get the lengths to order, with a waste allowance on the total; the working shows the studs, the plate lengths and the stud length the wall needs.

Estimates for planning, not professional advice. Read the full notice.

Wall

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 4.8 metres, 15 feet 9 inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 2.4 metres, 7 feet 10 and 1 half inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 45 millimetres, 1 and 3 quarters inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Example: a wall

13 pieces of timber

  • Studs 13
  • Plate lengths 2
  • Stud length the wall needs 2.31 m (7 ft 6 15/16 in)

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Stud or plate 50 mm, 2.4 m 13
  • Plate lengths, Stud or plate 50 mm, 4.8 m 2

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How many studs do I need for a stud wall?

    The wall length over the stud spacing, rounded up, plus one, then the extra studs you add at corners and openings. The table gives the count for common wall lengths at three spacings.

    What stud spacings does the calculator offer?

    Four hundred, four hundred and fifty and six hundred millimetre centres, as choices. It counts what you pick and does not say which a wall needs: check your plans with your local building control office.

    Worked example: a wall

    Show the working
    1. Studs on the spacing: the wall length over the spacing, rounded up, plus one 4.8 m (15 ft 9 in) ÷ 400 mm (1 ft 3 3/4 in) + 1 = 13 studs
    2. Plate lengths: the layers times the wall length, cut from the plate length 2 layers × 4.8 m (15 ft 9 in) ÷ 4.8 m (15 ft 9 in) = 2 plate lengths
    3. Studs to order, rounded up once 13 studs = 13 pieces of timber

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Waste allowance 0%
    Default Your own allowance, added once to the total. Check your label or supplier.

    Studs by wall length and spacing

    Studs on the spacing, with no corner or opening studs, by wall length and by spacing (centres)

    Studs on the spacing, with no corner or opening studs, by wall length and by spacing (centres)
    Wall lengthStuds at 400 mmStuds at 450 mmStuds at 600 mm
    2.4 m 775
    3 m 986
    3.6 m 1097
    4.8 m 13129
    6 m 161511
    7.2 m 191713

    Each count is the wall length over the spacing, rounded up, plus one. Corner and opening studs, plates and waste are added in the calculator above.