Roof Replacement Cost Calculator

Enter your roof's footprint and pitch and get the roof area in square metres, with the working shown. Your own prices go in the panel below: no address, no phone, and the figures stay on this device.

Estimates for planning, not professional advice. Read the full notice.

Roof size

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 12 metres, 39 feet 4 and 7 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 8 metres, 26 feet 2 and 15 sixteenths inches

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

Example: a gable roof

111 m² of roof

  • Roof area 110.85 m² (1,193.19 ft²)

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Roofing, per square metre, roof area, per square metre 111

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Your prices

    Type your own prices. They stay on this device: nothing is stored or sent, and this page has no price of its own to start from. A blank box is no price, not zero.

    From your own quote.

    From your own quote. Blank means none.

    Skip hire, disposal and anything else, added up.

    Any name you will recognise.

    The quote's whole price.

    Optional.

    Optional.

    Optional.

    Optional.

    Questions

    How is the roof counted?

    The calculator counts the roof in square metres and rounds up once, to whole square metres. The roof area itself is in square metres, so you can price per square metre in the panel below.

    How do I compare roofing quotes?

    Type each quote's total in the panel. The calculator divides every quote by the same roof area, so each shows its figure per square metre and its gap from the lowest total.

    Does it use my address?

    No. It asks for no address and no phone number. Your sizes and figures stay on this device.

    Worked example: a gable roof

    Show the working
    1. Roof area from the footprint and pitch 96 m² (1,033.34 ft²) × 1.155 = 110.85 m² (1,193.19 ft²)
    2. Divide by one square metre 110.85 m² (1,193.19 ft²) ÷ 1 m² (10.76 ft²) = 110.85
    3. Round up once, to whole square metres 110.85 = 111 m² of roof

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Allowance for waste (gable or mono-pitch roof) 0%
    Default A typed input, not a source's figure: no hidden extra. Check your roofing supplier.
    Allowance for waste (hip roof, dormers, valleys) 0%
    Default A typed input, not a source's figure: no hidden extra. Check your roofing supplier.