Jointing Compound Calculator

Enter the board area to get the jointing compound in tubs, the joint tape in rolls and the screws, from three rates you can see and change, rounded up once for each item you buy.

A ready-made setup of the Plasterboard Calculator.

Estimates for planning, not professional advice. Read the full notice.

Board and finishing rates

Like 11 m²

reads as 54.12 square metres, 582.54 square feet

Like 40 L

reads as 40 litres, 10.57 gallons

Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm

reads as 120 metres, 393 feet 8 and 7 sixteenths inches

Like 11 m²

reads as 0.08 square metres, 0.86 square feet

Example: a bedroom's walls and ceiling

3 10 L tubs

  • Jointing compound 21.65 L
  • Joint tape 64.944 m (213 ft 7/8 in)
  • Screws 677 screws

Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.

  • Jointing compound tubs, 10 L tub 3
  • Joint tape rolls, 50 m (164 ft 1/2 in) roll 2
  • Plasterboard screws 677

Share this project

This link carries:

    The project is inside the link, after the # sign. Browsers do not send that part to the site.

    Questions

    How many litres of jointing compound does my board area need?

    Multiply the board area, in hundreds of square metres, by the litres for each hundred square metres in the field above. The rate starts at an example, so replace it with the coverage on your own label.

    How many tubs do I buy?

    Divide the litres by the size of the tub you choose and round up once. A different tub size changes the tubs, not the litres.

    How many rolls of tape do I need?

    The tape needed is the board area in hundreds of square metres times the metres for each hundred square metres, divided by the length of the roll you choose and rounded up once.

    Worked example: a bedroom's walls and ceiling

    Show the working
    1. Compound: the board area over a hundred square metres, times the rate 54.12 m² (582.54 ft²) ÷ 100 m² (1,076.39 ft²) × 40 L = 21.648 L
    2. Tubs: divide by the tub and round up once 21.648 L ÷ 10 L = 3 × 10 L tubs
    3. Tape: the board area over a hundred square metres, times the rate 54.12 m² (582.54 ft²) ÷ 100 m² (1,076.39 ft²) × 120 m (393 ft 8 7/16 in) = 64.944 m (213 ft 7/8 in)
    4. Rolls: divide by the roll and round up once 64.944 m (213 ft 7/8 in) ÷ 50 m (164 ft 1/2 in) = 2 × 50 m (164 ft 1/2 in) rolls

    Assumptions

    The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.

    AssumptionValueDetails and changes
    Jointing compound per hundred square metres of board 40 L
    Default An example rate, not a maker's figure. It is a field above the result: replace it with the rate on your own label.
    Joint tape per hundred square metres of board 120 m (393 ft 8 7/16 in, converted)
    Default An example rate, not a maker's figure. It is a field above the result: replace it with the rate on your own label.
    Board area per screw 0.08 m² (0.86 ft², converted)
    Default An example rate, not a maker's figure. It is a field above the result: replace it with the rate on your own label.
    Tub size No default
    Default Choose it from the list above the result. Check your label or supplier.
    Tape roll length No default
    Default Choose it from the list above the result. Check your label or supplier.