Ceiling Paint Calculator
HoneyDoMath.eu
Enter a ceiling's length and width, its slope and the area one litre covers, and get the ceiling paint rounded up once to whole tins, packed into the fewest tins.
A ready-made setup of the Paint Calculator.
Estimates for planning, not professional advice. Read the full notice.
Example: a flat ceiling
1.51 L
- Ceiling area 15.12 m² (162.75 ft²)
- Paint bought, in whole tins 2.5 L
- Tins 1 × 2.5 L tin
Estimate for planning, from what you entered and the product data shown. Check product labels and your supplier before you buy.
Result
Enter a size to see your total.
Each product is rounded up once for the whole project, so the total can be less than the items bought alone added together. A line counted from a cut layout (sheets, boards or tiles laid out piece by piece) is counted for each item and added.
Questions
How do I count a sloping ceiling?
Choose the slope as an angle. The area is the floor area times the slope factor for that angle, so a steeper ceiling needs more paint than its floor suggests.
Is ceiling paint covered the same as wall paint?
Makers print different rates for different paints, so the calculator keeps a separate coverage line for the ceiling. It is your own figure from the tin.
Worked example: a flat ceiling
Show the working
- Ceiling area: length times width, with no slope 4.2 m (13 ft 9 3/8 in) × 3.6 m (11 ft 9 3/4 in) = 15.12 m² (162.75 ft²)
- Paint: area times coats, divided by the area one litre covers 15.12 m² (162.75 ft²) × 1 coat ÷ 10 m² (107.64 ft²) = 1.51 L
- Round up once to whole tins, then pack them into the largest tins first 1.51 L = 2.5 L
Assumptions
The figures behind the example. Sourced figures link to their source below; a default is a starting value to check against your label or supplier.
| Assumption | Value | Details and changes |
|---|---|---|
| Tin sizes counted, in litres | 2.5 L | |
| Default An example set of tin sizes: the largest, a medium one and the smallest. Check the tins you can buy. | ||
| Area one litre covers (example) | 10 m²/L | |
| Default An example value, not a maker's figure. Check the maker's sheet or your supplier and type your own. | ||
| Dulux Matt, maximum area one litre covers over two coats (the maker's figure: a tin can cover less, so the field above stays your own) | 14 m²/L[1] | |
| Dulux’s page for Dulux Matt gives its coverage as up to 14 m² per litre for 2 coats and lists tins of 2.5, 3, 5, 6, 7, 7.5 and 10 litres. | ||
Metres, centimetres or millimetres, like 3.8 m, 10 cm or 250 mm
What Dulux prints for Dulux Matt
Rows: 3
Coverage and tin sizes printed on the maker's page for Dulux Matt
| Figure | Dulux Matt |
|---|---|
| Maximum area one litre covers over two coats | 14 m²/L |
| Smallest tin printed | 2.5 L |
| Largest tin printed | 10 L |
Figures in the Dulux Matt column are per Dulux's product page, checked 13 Nov 2026.
Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers. Figures come from each maker's published sheets and are shown for information only.
Source: [1]
The maker's page lists several tin sizes between these two. Product names are trademarks of their owners. HoneyDoMath is not affiliated with, sponsored by or endorsed by these makers.
Sources (1)
-
Dulux Matt - Interior - Dulux (opens in new tab), Akzo Nobel UK Limited (Dulux), web page, no date printed.
Manufacturer data.
“Coverage Up to 14m2/litre Coats 2 2.5L 3L 5L 6L 7L 7.5L 10L”
Per Dulux's product page, checked 13 Nov 2026. Figures and regulations change; verify with the source. Back to where this is used (Source 1)
These are summaries of what the sources say, not professional advice. Rules and product data change. Check with your local building control office and the product label about your own project.
Sources
- [1] Dulux, Dulux Matt - Interior - Dulux. Checked 13 November 2026. https://www.dulux.co.uk/en/products/dulux-matt